mô hình

Ising Calibration 1.5 31B

Markdown · JSON

Ising Calibration 1.5 31B

Ising Calibration 1.5 phân tích đồ thị hiệu chuẩn lượng tử và chuẩn bị mô tả kỹ thuật, kết luận, tham số được trích xuất.

Về mô hình

Mô tả này trình bày khả năng của mô hình. Đầu vào, đầu ra và tùy chọn có trên Ailoot được liệt kê bên dưới cho phương thức đã chọn.

Phân tích kỹ thuật thí nghiệm lượng tử

Ising Calibration 1.5 là mô hình đa phương thức chuyên biệt của NVIDIA dành cho nhà nghiên cứu hệ lượng tử và kỹ sư hiệu chuẩn. Mô hình phân tích đồ thị thí nghiệm cùng yêu cầu văn bản.

Sáu hướng phân tích

  • Mô tả kỹ thuật nội dung đồ thị.
  • Kết luận về thí nghiệm.
  • Đánh giá ý nghĩa của kết quả.
  • Phân tích chất lượng khớp dữ liệu.
  • Trích xuất tham số.
  • Phân loại mức thành công của hiệu chuẩn.

Đầu vào và kết quả

Mô hình nhận đầu vào là văn bản cùng một hoặc nhiều ảnh đồ thị. Ảnh được biểu diễn bằng dữ liệu màu RGB ở định dạng PNG và JPEG. Câu trả lời là văn bản kỹ thuật: mô tả, kết luận, đánh giá độ khớp, giá trị trích xuất hoặc quyết định về thành công của thí nghiệm. Nó không trực tiếp điều khiển thiết bị.

Nền tảng và cách đặt yêu cầu

Kiến trúc dày đặc có khoảng 31 tỷ tham số, được xây dựng trên Gemma 4 31B có xử lý ảnh. Huấn luyện hướng tới tư liệu tổng hợp về hiệu chuẩn lượng tử.

Các cách được mô tả gồm phân tích không có ví dụ minh họa và tác vụ có ví dụ nhiều ảnh. Độ dài câu trả lời được công bố thuộc cài đặt của những ví dụ đó; không nêu ngữ cảnh tối đa chung độc lập.

Kết luận thí nghiệm cần chuyên gia kiểm tra trước khi dùng để hiệu chuẩn. Phân tích hình ảnh cần phương thức nhận ảnh.

Tác vụ thực tế

Tác vụ thực tế

Ví dụ kỹ thuật bằng tiếng Anh

Assess a text calibration fit record

Assess this quantum calibration record as text only. Detuning points in MHz: -1, 0, 1. Measured normalized signal: 0.20, 0.50, 0.80. Fitted values: 0.22, 0.49, 0.77. Report measured-minus-fit residuals and describe their pattern. Identify what uncertainty and acceptance information is missing before judging calibration quality; no chart or hardware access is provided.

Kết quả mong đợi

A three-row residual table, a short fit-quality discussion and the missing information needed for a specialist conclusion.

Kiểm tra kết quả

Residuals are -0.02, 0.01 and 0.03; no calibration-success decision is asserted without criteria or uncertainty.
Ailoot · OpenAI Chat POST /v1/chat/completions nvidia/ising-calibration-1.5-31b

nvidia/ising-calibration-1.5-31b

NVIDIA /nvidia/ising-calibration-1.5-31b
ID mô hình
  • nvidia/ising-calibration-1.5-31b
  • ising-calibration
  • ising-calibration-latest

Bắt đầu

Ising Calibration 1.5 phân tích đồ thị hiệu chuẩn lượng tử và chuẩn bị mô tả kỹ thuật, kết luận, tham số được trích xuất.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text
Đầu ra
text
Ngữ cảnh
4.096 tokens
Đầu ra tối đa
1.024 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
nvidia/ising-calibration-1.5-31b
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0002 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,0002 US$ / 1K
Ghi bộ nhớ đệm
0,0002 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0002 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "nvidia/ising-calibration-1.5-31b", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="nvidia/ising-calibration-1.5-31b",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "nvidia/ising-calibration-1.5-31b",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='nvidia/ising-calibration-1.5-31b',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/ising-calibration-1.5-31b, ising-calibration, ising-calibration-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/ising-calibration-1.5-31b, ising-calibration, ising-calibration-latest

Ailoot · OpenAI Chat POST /v1/chat/completions ising-calibration

ising-calibration

NVIDIA /ising-calibration
ID mô hình
  • nvidia/ising-calibration-1.5-31b
  • ising-calibration
  • ising-calibration-latest

Bắt đầu

Ising Calibration 1.5 phân tích đồ thị hiệu chuẩn lượng tử và chuẩn bị mô tả kỹ thuật, kết luận, tham số được trích xuất.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text
Đầu ra
text
Ngữ cảnh
4.096 tokens
Đầu ra tối đa
1.024 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
ising-calibration
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0002 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,0002 US$ / 1K
Ghi bộ nhớ đệm
0,0002 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0002 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "ising-calibration", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="ising-calibration",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "ising-calibration",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='ising-calibration',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/ising-calibration-1.5-31b, ising-calibration, ising-calibration-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/ising-calibration-1.5-31b, ising-calibration, ising-calibration-latest

Ailoot · OpenAI Chat POST /v1/chat/completions ising-calibration-latest

ising-calibration-latest

NVIDIA /ising-calibration-latest
ID mô hình
  • nvidia/ising-calibration-1.5-31b
  • ising-calibration
  • ising-calibration-latest

Bắt đầu

Ising Calibration 1.5 phân tích đồ thị hiệu chuẩn lượng tử và chuẩn bị mô tả kỹ thuật, kết luận, tham số được trích xuất.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text
Đầu ra
text
Ngữ cảnh
4.096 tokens
Đầu ra tối đa
1.024 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
ising-calibration-latest
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0002 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,0002 US$ / 1K
Ghi bộ nhớ đệm
0,0002 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0002 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "ising-calibration-latest", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="ising-calibration-latest",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "ising-calibration-latest",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='ising-calibration-latest',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/ising-calibration-1.5-31b, ising-calibration, ising-calibration-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/ising-calibration-1.5-31b, ising-calibration, ising-calibration-latest

FAQ · nvidia/ising-calibration-1.5-31b
Có những đầu vào và kết quả nào?

POST /v1/chat/completions · nvidia/ising-calibration-1.5-31b: text → text

POST /v1/chat/completions · ising-calibration: text → text

POST /v1/chat/completions · ising-calibration-latest: text → text

Yêu cầu sử dụng những trường nào?

POST /v1/chat/completions · nvidia/ising-calibration-1.5-31b: model, messages, stream

POST /v1/chat/completions · ising-calibration: model, messages, stream

POST /v1/chat/completions · ising-calibration-latest: model, messages, stream

Áp dụng những giới hạn nào?

POST /v1/chat/completions · nvidia/ising-calibration-1.5-31b: ctx: 4096; max_out: 1024; messages.min_items: 1

POST /v1/chat/completions · ising-calibration: ctx: 4096; max_out: 1024; messages.min_items: 1

POST /v1/chat/completions · ising-calibration-latest: ctx: 4096; max_out: 1024; messages.min_items: 1

Xem thêm chi tiết

Kết nối Ailoot với Claude Code, OpenCode, Hermes hoặc ứng dụng của bạn.

Công ty và danh mục dự án của công ty

Công ty và danh mục dự án của công ty: hàng triệu khách hàng; doanh số hàng tỷ mỗi tháng.

Mua token với giá ưu đãi.

Ưu đãi thuê bao cho nhu cầu thường xuyên. Mã khuyến mãi giảm đến 50% khi mua token.

Thuê bao
Chọn gói ưu đãi cho các yêu cầu thường xuyên của bạn.
Mã giảm đến 50%
Nhập mã khi mua. Giá được tính lại theo chương trình đang áp dụng.
Chi phí trong lịch sử
Mô hình, token và số tiền được lưu cho mỗi yêu cầu.

Chọn gói thuê bao · Xem giá mô hình

Kết nối API vào sản phẩm bạn đang bán.

SaaS, ứng dụng và bot — theo đề nghị giao kết chính thức và thỏa thuận cấp phép Ailoot. Muốn bán lại, hãy yêu cầu giấy phép bán lại.

Ứng dụng thương mại
Tích hợp tạo văn bản, ảnh, video và âm thanh vào các tính năng trả phí của dịch vụ.
Giấy phép bán lại
Gửi mô tả dự án và cách cung cấp quyền truy cập. Yêu cầu điều khoản sử dụng và bán lại bằng văn bản.
Tài liệu trên website
Đề nghị giao kết, thỏa thuận cấp phép và chính sách xử lý dữ liệu có sẵn trước khi kết nối.

Yêu cầu giấy phép bán lại · Đề nghị giao kết và thỏa thuận cấp phép