mô hình

Nemotron 3.5 Lightning 30B A3B

Markdown · JSON

Nemotron 3.5 Lightning 30B A3B

Nemotron 3.5 Lightning là mô hình văn bản của NVIDIA dành cho tác vụ tác nhân kéo dài, lập trình, tìm kiếm trong tài liệu và hội thoại.

Về mô hình

Mô tả này trình bày khả năng của mô hình. Đầu vào, đầu ra và tùy chọn có trên Ailoot được liệt kê bên dưới cho phương thức đã chọn.

Mô hình làm việc cho quy trình dài

Nemotron 3.5 Lightning dành cho tác nhân tự chủ và chuỗi hành động kéo dài qua nhiều bước. Mô hình còn được dùng trong trợ lý hội thoại, tìm kiếm dựa trên tài liệu và thực hiện chỉ dẫn. Đầu vào và đầu ra là văn bản.

Kiến trúc và ngữ cảnh

Hỗn hợp chuyên gia lai kết hợp Mamba-2 với các lớp chú ý riêng. Tổng cộng mô hình có 30 tỷ tham số, 3 tỷ hoạt động cho mỗi token. Ngữ cảnh đạt một triệu token.

Các lớp dự đoán nhiều token tiếp theo được huấn luyện thêm để phối hợp đề xuất của chúng với phân phối của mô hình chính. Bản phát hành đi kèm các cách giải mã suy đoán. Chúng giúp tổ chức tạo nội dung, nhưng không đặt tốc độ bảo đảm cho yêu cầu.

Năm giai đoạn chuẩn bị

  1. Huấn luyện trước trên hơn 20 nghìn tỷ token mã, toán học, khoa học và kiến thức chung, với quá trình chuẩn bị ở định dạng NVFP4.
  2. Tiếp tục huấn luyện trước cho các lớp dự đoán nhiều token tương lai: đề xuất của chúng được phối hợp với phân phối của mô hình chính.
  3. Học từ ví dụ, gồm chỉ dẫn, gọi công cụ, kết quả có cấu trúc, tìm đoạn xa và kết hợp tài liệu.
  4. Học tăng cường trong nhiều môi trường cho suy luận, mã, khoa học, tác vụ công cụ nhiều bước và hội thoại.
  5. Nén số học sau đó cho biến thể được công bố.

Giai đoạn cuối mô tả bản phát hành cụ thể của nhà sản xuất, không xác định độ chính xác tính toán của yêu cầu được phục vụ. Trong quy trình bên ngoài, mô hình đề xuất hành động và kết quả văn bản; ứng dụng thực thi công cụ.

Ngôn ngữ và phiên bản

Danh sách chính thức gồm tiếng Anh, Tây Ban Nha, Pháp, Đức, Italy và Nhật, cùng các ngôn ngữ lập trình. Mốc dữ liệu cho huấn luyện trước là đến tháng Chín năm 2025, cho huấn luyện sau là đến tháng Năm năm 2026.

Đặc tính của bản phát hành có nén số học mô tả đúng biến thể đó. Không thể xác định độ chính xác tính toán của từng lần thực thi chỉ từ tên mô hình. Một triệu token là ngữ cảnh chung, không phải lời hứa riêng về độ dài đầu ra.

Tác vụ thực tế

Tác vụ thực tế

Ví dụ kỹ thuật bằng tiếng Anh

Apply a document-grounded procedure

Use these procedure excerpts to draft the next action for case C-09. [Rule 1] Packages with a damaged seal go to inspection. [Rule 2] Only inspection-cleared packages enter stock. [Record] C-09 has a damaged seal and no inspection result. Return the current permitted step, blocked step and supporting rule labels.

Kết quả mong đợi

Three concise fields covering the permitted inspection step, blocked stocking and source evidence.

Kiểm tra kết quả

Check that missing inspection clearance prevents stocking and does not become an assumed failed inspection.
Ailoot · Anthropic Messages POST /v1/messages nvidia/nemotron-3.5-lightning-30b-a3b

nvidia/nemotron-3.5-lightning-30b-a3b

NVIDIA /nvidia/nemotron-3.5-lightning-30b-a3b

Bắt đầu

Nemotron 3.5 Lightning là mô hình văn bản của NVIDIA dành cho tác vụ tác nhân kéo dài, lập trình, tìm kiếm trong tài liệu và hội thoại.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · Anthropic Messages POST /v1/messages
Đầu vào
text
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
32.768 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
nvidia/nemotron-3.5-lightning-30b-a3b
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
user, assistant
Mặc định—
Trườngmessages[].contentLoạistring|content_block[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườngsystemLoạistring|content_block[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmax_tokensLoạiintegerYêu cầuBắt buộcGiá trị & giới hạn
Tối thiểu: 1
Giới hạn áp dụng cho: Giới hạn trên chính xác của mô hình hoặc thẻ được chọn
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngstop_sequencesLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ
Mặc định—
Trườngtools[].descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].input_schemaLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.budget_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngoutput_config.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngmetadataLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngcache_controlLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content hoặc khối type=text

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages, max_tokens
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot Anthropic MessagesPOST /v1/messages
Đầu vào
0,00008 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,00008 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · Anthropic Messages

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "nvidia/nemotron-3.5-lightning-30b-a3b", "max_tokens": 1024, "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
import anthropic
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = anthropic.Anthropic(base_url="https://api.ailoot.ai", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
msg = client.messages.create(
    model="nvidia/nemotron-3.5-lightning-30b-a3b",
    max_tokens=1024,
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(msg.to_dict(mode="json"))
import Anthropic from "@anthropic-ai/sdk";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new Anthropic({ baseURL: "https://api.ailoot.ai", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const msg = await client.messages.create({
  model: "nvidia/nemotron-3.5-lightning-30b-a3b",
  max_tokens: 1024,
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(msg);
import anthropic,os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=anthropic.Anthropic(base_url="https://api.ailoot.ai",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.messages.stream(model='nvidia/nemotron-3.5-lightning-30b-a3b',max_tokens=1024,messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_message()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · Anthropic Messages

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi khối nội dung, chữ ký suy nghĩ và ID sử dụng công cụ thực tế. Ghép tất cả các phần thay đổi của khối SSE; khối văn bản đầu tiên không phải toàn bộ đầu ra.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngmodelLoạistring
Trườngcontent[]Loạitext|thinking|tool_use|other content block
Trườngstop_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Ailoot · OpenAI Chat POST /v1/chat/completions nvidia/nemotron-3.5-lightning-30b-a3b

nvidia/nemotron-3.5-lightning-30b-a3b

NVIDIA /nvidia/nemotron-3.5-lightning-30b-a3b
ID mô hình
  • nvidia/nemotron-3.5-lightning-30b-a3b
  • nemotron-lightning
  • nemotron-lightning-latest

Bắt đầu

Nemotron 3.5 Lightning là mô hình văn bản của NVIDIA dành cho tác vụ tác nhân kéo dài, lập trình, tìm kiếm trong tài liệu và hội thoại.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text
Đầu ra
text
Ngữ cảnh
4.096 tokens
Đầu ra tối đa
1.024 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
nvidia/nemotron-3.5-lightning-30b-a3b
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,00008 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,00008 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "nvidia/nemotron-3.5-lightning-30b-a3b", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="nvidia/nemotron-3.5-lightning-30b-a3b",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "nvidia/nemotron-3.5-lightning-30b-a3b",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='nvidia/nemotron-3.5-lightning-30b-a3b',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Ailoot · OpenAI Chat POST /v1/chat/completions nemotron-lightning

nemotron-lightning

NVIDIA /nemotron-lightning
ID mô hình
  • nvidia/nemotron-3.5-lightning-30b-a3b
  • nemotron-lightning
  • nemotron-lightning-latest

Bắt đầu

Nemotron 3.5 Lightning là mô hình văn bản của NVIDIA dành cho tác vụ tác nhân kéo dài, lập trình, tìm kiếm trong tài liệu và hội thoại.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text
Đầu ra
text
Ngữ cảnh
4.096 tokens
Đầu ra tối đa
1.024 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
nemotron-lightning
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,00008 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,00008 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "nemotron-lightning", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="nemotron-lightning",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "nemotron-lightning",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='nemotron-lightning',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Ailoot · OpenAI Chat POST /v1/chat/completions nemotron-lightning-latest

nemotron-lightning-latest

NVIDIA /nemotron-lightning-latest
ID mô hình
  • nvidia/nemotron-3.5-lightning-30b-a3b
  • nemotron-lightning
  • nemotron-lightning-latest

Bắt đầu

Nemotron 3.5 Lightning là mô hình văn bản của NVIDIA dành cho tác vụ tác nhân kéo dài, lập trình, tìm kiếm trong tài liệu và hội thoại.

Đầu vào được chấp nhận
Văn bản
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text
Đầu ra
text
Ngữ cảnh
4.096 tokens
Đầu ra tối đa
1.024 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
nemotron-lightning-latest
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,00008 US$ / 1K
Đầu ra
0,0002 US$ / 1K
Đọc bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm
0,00008 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,00008 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "nemotron-lightning-latest", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="nemotron-lightning-latest",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "nemotron-lightning-latest",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='nemotron-lightning-latest',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

nvidia/nemotron-3.5-lightning-30b-a3b, nemotron-lightning, nemotron-lightning-latest

FAQ · nvidia/nemotron-3.5-lightning-30b-a3b
Có những đầu vào và kết quả nào?

POST /v1/messages · nvidia/nemotron-3.5-lightning-30b-a3b: text → text

POST /v1/chat/completions · nvidia/nemotron-3.5-lightning-30b-a3b: text → text

POST /v1/chat/completions · nemotron-lightning: text → text

POST /v1/chat/completions · nemotron-lightning-latest: text → text

Yêu cầu sử dụng những trường nào?

POST /v1/messages · nvidia/nemotron-3.5-lightning-30b-a3b: model, messages, system, max_tokens, stream, metadata

POST /v1/chat/completions · nvidia/nemotron-3.5-lightning-30b-a3b: model, messages, stream

POST /v1/chat/completions · nemotron-lightning: model, messages, stream

POST /v1/chat/completions · nemotron-lightning-latest: model, messages, stream

Áp dụng những giới hạn nào?

POST /v1/messages · nvidia/nemotron-3.5-lightning-30b-a3b: ctx: 262144; max_out: 32768; messages.min_items: 1; max_tokens.minimum: 1

POST /v1/chat/completions · nvidia/nemotron-3.5-lightning-30b-a3b: ctx: 4096; max_out: 1024; messages.min_items: 1

POST /v1/chat/completions · nemotron-lightning: ctx: 4096; max_out: 1024; messages.min_items: 1

POST /v1/chat/completions · nemotron-lightning-latest: ctx: 4096; max_out: 1024; messages.min_items: 1

Xem thêm chi tiết

Kết nối Ailoot với Claude Code, OpenCode, Hermes hoặc ứng dụng của bạn.

Công ty và danh mục dự án của công ty

Công ty và danh mục dự án của công ty: hàng triệu khách hàng; doanh số hàng tỷ mỗi tháng.

Mua token với giá ưu đãi.

Ưu đãi thuê bao cho nhu cầu thường xuyên. Mã khuyến mãi giảm đến 50% khi mua token.

Thuê bao
Chọn gói ưu đãi cho các yêu cầu thường xuyên của bạn.
Mã giảm đến 50%
Nhập mã khi mua. Giá được tính lại theo chương trình đang áp dụng.
Chi phí trong lịch sử
Mô hình, token và số tiền được lưu cho mỗi yêu cầu.

Chọn gói thuê bao · Xem giá mô hình

Kết nối API vào sản phẩm bạn đang bán.

SaaS, ứng dụng và bot — theo đề nghị giao kết chính thức và thỏa thuận cấp phép Ailoot. Muốn bán lại, hãy yêu cầu giấy phép bán lại.

Ứng dụng thương mại
Tích hợp tạo văn bản, ảnh, video và âm thanh vào các tính năng trả phí của dịch vụ.
Giấy phép bán lại
Gửi mô tả dự án và cách cung cấp quyền truy cập. Yêu cầu điều khoản sử dụng và bán lại bằng văn bản.
Tài liệu trên website
Đề nghị giao kết, thỏa thuận cấp phép và chính sách xử lý dữ liệu có sẵn trước khi kết nối.

Yêu cầu giấy phép bán lại · Đề nghị giao kết và thỏa thuận cấp phép