Poolside: Laguna S 2.1
Poolside Laguna S 2.1 是用於代理式程式設計與長時間工作的文字模型,具備 118B 總參數與約 8B 啟用參數。它結合 1,048,576 token 模型上下文、原生工具使用與交錯推理;保留先前思考有助於它跨工具呼叫有效延續工作。
- Ailoot Ultra · OpenAI Chat
POST /v1/chat/completionspoolside/laguna-s-2.1 - Ailoot Ultra · Anthropic Messages
POST /v1/messagespoolside/laguna-s-2.1
關於模型
此說明介紹模型的能力。Ailoot 可用的輸入、輸出與選項,依所選方法列於下方。
Poolside Laguna S 2.1 是為代理式程式設計與長時間工作設計的混合專家語言模型。它具備 118B 總參數,每個 token 約啟用 8B 參數,在製造商系列中介於較小的 Laguna XS 2.1 與較大的 Laguna M.1 之間。模型處理文字,並在連接工具的應用程式中產生文字、程式碼、推理與工具呼叫請求。
其架構在 48 層中結合全域與滑動視窗注意力:12 個全域層與 36 個滑動視窗層。512 token 的滑動視窗描述這些層內的區域注意力,文件所載的模型上下文則為 1,048,576 token。兩者是不同量測。較大的上下文支援經多個步驟累積原始碼檔案、觀察與決策的任務。請將工作目標與有意義的證據保留在一起,並在適用設定內為後續推理與最終回應預留空間。
模型的核心用途是需要持續推進、檢查與修訂的軟體工作。處理程式碼庫任務時,請提供預期行為、文字形式的相關檔案、相依資訊,以及實際失敗輸出。請要求聚焦結果:「追蹤這個回歸問題的原因,提出保留文件所載介面的變更,並指出能區分有效修正與無關變更的檢查。」在連接工具的工作流程中,請先向模型提供每項已執行檢查的結果,再讓它選擇下一步。
進行最佳化工作時,請提供量測與明確目標。例如:「使用這份效能剖析與配置報告找出瓶頸。提出一項變更、解釋預期效果,並在重複相同量測後與基準比較。」這讓效能主張可以檢視。Poolside 的發布說明將驗證與持續進展視為重要行為,但有說服力的解釋本身無法證明修訂更快、正確或完成。請保留支持保留或捨棄變更的觀察。
Laguna S 2.1 支援在工具呼叫之前與之間交錯思考。製造商建議在後續歷史中保留先前助理訊息的推理內容;刪除這些區塊可能導致後續步驟停止推理。請將助理回應、工具呼叫資訊與相應工具結果一起保留。這有助於較長任務從實際狀態繼續,而非反覆重建已嘗試的工作。
文件所載的思考選項為 off 與 max,製造商描述的設定預設啟用 max。模型在該模式自行決定思考額度;發布說明未提供獨立的 low、medium 與 high 強度控制項。對於代理式程式設計,Poolside 建議啟用思考並在步驟間保留。請明確說明最終產物與完成準則,並區分長篇推理序列與已完成結果。製造商指出過度思考是實質限制,尤其是在競賽數學上。
工具定義需要特別留意。Poolside 報告 S 2.1 初期可能依賴熟悉的工具介面,而非仔細遵循相似但不同的綱要。當工具引數包含巢狀陣列時,也可能產生格式錯誤或跳脫不正確的 JSON。請提供實際引數定義、驗證提議的呼叫,並在呼叫不相符時回傳精確錯誤。製造商描述可透過上下文內回饋修正部分不符情況。請保留後續產生的工具觀察,供下一次決策使用。
製造商發布獨立的 BF16 與量化版本,以及可選用的 DFlash 草稿模型。這些是不同產物與服務部署配方,因此不應僅依一般模型名稱推定量化檢查點的記憶體用量或推測式解碼效能。一般文字工作請將原始碼、命令輸出與文件摘錄準備為可讀文字。發布說明指出模型缺乏視覺能力;螢幕擷取畫面需要文字觀察或適當的外部檢視步驟,才能支持分析。
請要求最終產物指出變更的產物、重要決策、觀察到的檢查,以及任何未解條件。程式碼審查請將發現連結到相關原始碼,並說明每個問題為何影響行為。修復工作請區分修補提案與實際檢查過行為的修補。保留推理與工具歷史有助於模型完成任務,而最終產物與記錄結果則確立完成了什麼。
實用任務
實用任務
英文技術範例
Propose a measured loop optimization
Review this Python loop: totals = {}
for row in rows:
totals[row["id"]] = sum(x["amount"] for x in rows if x["id"] == row["id"])
It repeatedly rescans rows. Propose a single-pass replacement preserving per-ID totals. Give a duplicate-ID example and explain how to compare results and timing on the same input without claiming a speed measurement.預期結果
A single-pass aggregation patch, correctness example and a baseline comparison procedure.檢查結果
Check repeated IDs accumulate all amounts and the proposal contains no fabricated timing improvement.Ailoot Ultra · OpenAI Chat POST /v1/chat/completions poolside/laguna-s-2.1
poolside/laguna-s-2.1入門
Poolside Laguna S 2.1 是用於代理式程式設計與長時間工作的文字模型,具備 118B 總參數與約 8B 啟用參數。它結合 1,048,576 token 模型上下文、原生工具使用與交錯推理;保留先前思考有助於它跨工具呼叫有效延續工作。
- 接受的輸入
- 文字
- 結果
- 文字
Ailoot 可用 · 輸入與方法
Ailoot Ultra · OpenAI Chat POST /v1/chat/completions
- 輸入
text- 輸出
text- 輸出格式
- json 或 SSE
| 欄位 | 類型 | 要求 | 值與限制 | 預設值 |
|---|---|---|---|---|
欄位model | 類型string | 要求必填 | 值與限制 poolside/laguna-s-2.1 | 預設值— |
欄位messages | 類型message[] | 要求必填 | 值與限制 項目數下限: 1 | 預設值— |
欄位messages[].role | 類型string | 要求必填 | 值與限制 範例:system, user, assistant, tool, function 條件: 這些角色由 原始碼中的相容型別明確表示;確切角色集合仍依模型而定。 依模型而定 | 預設值— |
欄位messages[].content | 類型string|content_part[]|null | 要求選填 | 值與限制 | 預設值— |
欄位messages[].tool_calls | 類型tool_call[] | 要求選填 | 值與限制 | 預設值— |
欄位messages[].tool_call_id | 類型string | 要求選填 | 值與限制 適用條件: role=tool;使用實際回傳的 ID | 預設值— |
欄位messages[].name | 類型string | 要求選填 | 值與限制 | 預設值— |
欄位messages[].reasoning_content | 類型string | 要求選填 | 值與限制 適用條件: 此模型使用推理內容時,將實際回傳的推理內容帶回後續請求 | 預設值— |
欄位messages[].reasoning_details | 類型object|array | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位max_tokens | 類型integer | 要求選填 | 值與限制 最小值: 1 依模型而定 | 預設值— |
欄位max_completion_tokens | 類型integer | 要求選填 | 值與限制 最小值: 1 依模型而定 | 預設值— |
欄位stream | 類型boolean | 要求選填 | 值與限制 | 預設值false |
欄位stream_options.include_usage | 類型boolean | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位temperature | 類型number | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位top_p | 類型number | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位stop | 類型string|string[] | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位tools | 類型function_tool[] | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位tools[].type | 類型string | 要求選填 | 值與限制 function 依模型而定 | 預設值— |
欄位tools[].function.name | 類型string | 要求必填 | 值與限制 適用條件: 已提供函式工具 | 預設值— |
欄位tools[].function.description | 類型string | 要求選填 | 值與限制 | 預設值— |
欄位tools[].function.parameters | 類型JSON_schema | 要求選填 | 值與限制 | 預設值— |
欄位tool_choice | 類型string|object | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位parallel_tool_calls | 類型boolean | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位response_format | 類型object | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位reasoning_effort | 類型string | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位reasoning | 類型object | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位service_tier | 類型string | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位instructions | 類型string | 要求選填 | 值與限制 相容性欄位 | 預設值— |
欄位functions | 類型function[] | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位function_call | 類型string|object | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位prompt_cache_options | 類型object | 要求選填 | 值與限制 依模型而定 | 預設值— |
欄位modalities | 類型string[] | 要求選填 | 值與限制 text | 預設值— |
欄位provider | 類型object | 要求選填 | 值與限制 條件: 此 Ultra 文字路由拒絕 provider.options | 預設值— |
欄位cache_control.ttl | 類型string | 要求選填 | 值與限制 條件: 實際提示詞快取位置拒絕 1h | 預設值— |
輸入素材組合
文字 · UTF8 文字
messages[].content
方法參數與生命週期
| 參數 | 規格 |
|---|---|
參數content_type | 規格application/json |
參數required | 規格model, messages |
參數material_types | 規格text |
參數messages | 規格具有 role/content 結構的訊息陣列 |
參數file_material | 規格實際 UTF-8 文件以原文文字插入;不推定檔案 ID |
參數optional_controls | 規格stream, temperature, top_p, stop, max_tokens, max_completion_tokens, reasoning, response_format, tools, tool_choice |
參數control_scope | 規格依模型而定;使用者函式工具與託管工具不同 |
參數output_modalities | 規格text |
參數hosted_operations | 規格false |
參數multimodal_input_binding | 規格null |
生命週期: synchronous_or_streamed
將確切模型 ID 與 messages 一併送出。
上下文長度不是輸出上限。
文字檔案可提供原文文字;圖片/音訊/檔案物件輸入需要精確綁定。
方案
費率資訊不會增加請求選項。支援的參數列於所選方法中。
- 快速模式
- 標準費率 選取快速模式時
- flex 模式
- 標準費率 選取 flex 模式時
- 最高推理強度
- 標準費率 最高推理強度採用 default 調整值時
Ailoot 費率
各設定的價格
請逐一核對各項費用與所列條件。每組互為替代選項的設定只套用一種費率。
| 設定 | 費率表 | 上下文 Token 數大於 | 上下文 Token 數小於或等於 | 費用 |
|---|---|---|---|---|
| 設定詞元基本費率 | 費率表基本費率 | 上下文 Token 數大於— | 上下文 Token 數小於或等於無上限 | 費用 輸入 · 輸入 Token $0.0002 / 1K Token 輸出 · 輸出 Token $0.0004 / 1K Token 輸入 · 讀取快取 $0.00002 / 1K Token 輸入 · 寫入快取 — / 1K Token 輸入 · 寫入快取,1 小時 — / 1K Token |
| 設定請求長度級距 1 | 費率表— | 上下文 Token 數大於0 | 上下文 Token 數小於或等於無上限 | 費用 輸入 · 輸入 Token $0.0002 / 1K Token 輸出 · 輸出 Token $0.0004 / 1K Token 輸入 · 讀取快取 $0.00002 / 1K Token 輸入 · 寫入快取 — / 1K Token 輸入 · 寫入快取,1 小時 — / 1K Token |
Ailoot 會在請求前預留估算金額。取得結果後,依實測用量結算最終費用。串流結算採用最終用量紀錄。預留金額與結算的運作方式 →
請求範例
Ailoot Ultra · OpenAI Chat
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "poolside/laguna-s-2.1", "messages": [{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}]}')
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
-H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
--data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
r=json.loads(Path("result.json").read_text())
for x in r.get("choices",[]):
if x.get("message",{}).get("content"): print(x["message"]["content"])
PY_RESULT
from openai import OpenAI
import os
if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
result=client.chat.completions.create(model='poolside/laguna-s-2.1',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}])
import base64, json
from pathlib import Path
def save_result(data, stem="result"):
# Keep every field, including usage, IDs, reasoning and tool requests.
Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
print(json.dumps(data, ensure_ascii=False, indent=2))
def save_blob(encoded, suffix, label):
raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
file = Path(stem + "-" + label + "." + ext)
file.write_bytes(raw)
print("Saved", file)
for index, block in enumerate(data.get("content") or []):
print("Content", index, json.dumps(block, ensure_ascii=False))
for choice in data.get("choices") or []:
print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
for index, item in enumerate(data.get("output") or []):
print("Output", index, json.dumps(item, ensure_ascii=False))
if item.get("type") == "image_generation_call" and item.get("result"):
save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
for ci, candidate in enumerate(data.get("candidates") or []):
for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
blob = part.get("inlineData") or part.get("inline_data")
if blob and blob.get("data"):
mime = blob.get("mimeType") or blob.get("mime_type")
suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))
save_result(result.to_dict(mode="json"))
from openai import OpenAI
import os
from pathlib import Path
if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path
def save_result(data, stem="result"):
# Keep every field, including usage, IDs, reasoning and tool requests.
Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
print(json.dumps(data, ensure_ascii=False, indent=2))
def save_blob(encoded, suffix, label):
raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
file = Path(stem + "-" + label + "." + ext)
file.write_bytes(raw)
print("Saved", file)
for index, block in enumerate(data.get("content") or []):
print("Content", index, json.dumps(block, ensure_ascii=False))
for choice in data.get("choices") or []:
print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
for index, item in enumerate(data.get("output") or []):
print("Output", index, json.dumps(item, ensure_ascii=False))
if item.get("type") == "image_generation_call" and item.get("result"):
save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
for ci, candidate in enumerate(data.get("candidates") or []):
for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
blob = part.get("inlineData") or part.get("inline_data")
if blob and blob.get("data"):
mime = blob.get("mimeType") or blob.get("mime_type")
suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))
with client.chat.completions.stream(model='poolside/laguna-s-2.1',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
for event in stream:
payload=event.to_dict(mode="json")
log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
print(json.dumps(payload,ensure_ascii=False))
final=stream.get_final_completion()
save_result(final.to_dict(mode="json"),"stream-result")
接收並儲存結果
Ailoot Ultra · OpenAI Chat
json 或 SSE
保留所有已完成的結果
請保留所有完整傳回的回應、檔案與內容區塊。
保留每個候選項及其內容/工具呼叫/推理。SSE 中依候選項/工具索引組合增量,保留最終完成原因與用量。
需要檢查原始回應時
保留請求/回應 ID 與標頭。未提供通用的文字工作擷取 URL。
回應欄位
| 欄位 | 類型 |
|---|---|
欄位choices[].index | 類型integer |
欄位choices[].message.content | 類型string|null |
欄位choices[].message.tool_calls | 類型tool_call[] |
欄位choices[].message.reasoning_content | 類型string |
欄位choices[].message.reasoning_details | 類型object|array |
欄位choices[].finish_reason | 類型string|null |
欄位usage | 類型object |
錯誤與後續步驟
| 回應 | 條件 | 下一步 |
|---|---|---|
回應400 · invalid_request_error | 條件必要欄位、素材表示方式或參數值無效 | 下一步提出新的建立請求前,先修正指定欄位。 |
別名
模型別名
Ailoot Ultra poolside/laguna-s-2.1
方法路徑別名
請使用上方列出的 API 方法路徑。
相關呼叫用 ID
Ailoot Ultra · Anthropic Messages POST /v1/messages poolside/laguna-s-2.1
poolside/laguna-s-2.1入門
Poolside Laguna S 2.1 是用於代理式程式設計與長時間工作的文字模型,具備 118B 總參數與約 8B 啟用參數。它結合 1,048,576 token 模型上下文、原生工具使用與交錯推理;保留先前思考有助於它跨工具呼叫有效延續工作。
- 接受的輸入
- 文字
- 結果
- json · sse
Ailoot 可用 · 輸入與方法
Ailoot Ultra · Anthropic Messages POST /v1/messages
- 輸入
text- 輸出
json,sse- 輸出格式
- JSON 或 SSE
| 欄位 | 類型 | 要求 | 值與限制 | 預設值 |
|---|---|---|---|---|
欄位model | 類型string | 要求必填 | 值與限制 poolside/laguna-s-2.1 | 預設值— |
欄位messages | 類型message[] | 要求必填 | 值與限制 | 預設值— |
欄位messages[].role | 類型string | 要求必填 | 值與限制 user, assistant | 預設值— |
欄位messages[].content | 類型string | 要求必填 | 值與限制 | 預設值— |
欄位max_tokens | 類型integer | 要求必填 | 值與限制 | 預設值— |
欄位stream | 類型boolean | 要求選填 | 值與限制 | 預設值false |
輸入素材組合
文字 · UTF-8 文字
messages[].content 字串
方法參數與生命週期
| 參數 | 規格 |
|---|---|
參數content_type | 規格application/json |
參數required | 規格model, messages, max_tokens |
參數optional_controls | 規格stream |
參數material_types | 規格text |
參數text_file_material | 規格讀取實際 UTF-8 文件,將文字放入指定的 input 或訊息內容字串。 |
生命週期: synchronous_or_streamed
方案
費率資訊不會增加請求選項。支援的參數列於所選方法中。
- 快速模式
- 標準費率 選取快速模式時
- flex 模式
- 標準費率 選取 flex 模式時
- 最高推理強度
- 標準費率 最高推理強度採用 default 調整值時
Ailoot 費率
各設定的價格
請逐一核對各項費用與所列條件。每組互為替代選項的設定只套用一種費率。
| 設定 | 費率表 | 上下文 Token 數大於 | 上下文 Token 數小於或等於 | 費用 |
|---|---|---|---|---|
| 設定詞元基本費率 | 費率表基本費率 | 上下文 Token 數大於— | 上下文 Token 數小於或等於無上限 | 費用 輸入 · 輸入 Token $0.0002 / 1K Token 輸出 · 輸出 Token $0.0004 / 1K Token 輸入 · 讀取快取 $0.00002 / 1K Token 輸入 · 寫入快取 — / 1K Token 輸入 · 寫入快取,1 小時 — / 1K Token |
| 設定請求長度級距 1 | 費率表— | 上下文 Token 數大於0 | 上下文 Token 數小於或等於無上限 | 費用 輸入 · 輸入 Token $0.0002 / 1K Token 輸出 · 輸出 Token $0.0004 / 1K Token 輸入 · 讀取快取 $0.00002 / 1K Token 輸入 · 寫入快取 — / 1K Token 輸入 · 寫入快取,1 小時 — / 1K Token |
Ailoot 會在請求前預留估算金額。取得結果後,依實測用量結算最終費用。串流結算採用最終用量紀錄。預留金額與結算的運作方式 →
請求範例
Ailoot Ultra · Anthropic Messages
{
"model": "poolside/laguna-s-2.1",
"max_tokens": 128,
"messages": [
{
"role": "user",
"content": "Summarize the incident report."
}
],
"stream": false
}set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 document}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json, os
from pathlib import Path
source_file = Path(os.environ['AILOOT_TEXT_FILE'])
if not source_file.is_file():
raise SystemExit('Set AILOOT_TEXT_FILE to your actual UTF-8 document')
text = source_file.read_text(encoding='utf-8')
if not text.strip():
raise SystemExit('Choose a document containing text')
payload = {'model': 'poolside/laguna-s-2.1', 'max_tokens': 128, 'messages': [{'role': 'user', 'content': 'Summarize the incident report.'}]}
payload['messages'][0]['content'] = 'Summarize this material and quote supporting source passages.\n\n' + text
Path('request.json').write_text(json.dumps(payload, ensure_ascii=False), encoding='utf-8')
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
-H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
--data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
result = json.loads(Path('result.json').read_text(encoding='utf-8'))
print(json.dumps(result, ensure_ascii=False, indent=2))
PY_RESULT
import json, os
from pathlib import Path
source_file = Path(os.environ['AILOOT_TEXT_FILE'])
if not source_file.is_file():
raise SystemExit('Set AILOOT_TEXT_FILE to your actual UTF-8 document')
text = source_file.read_text(encoding='utf-8')
if not text.strip():
raise SystemExit('Choose a document containing text')
payload = {'model': 'poolside/laguna-s-2.1', 'max_tokens': 128, 'messages': [{'role': 'user', 'content': 'Summarize the incident report.'}]}
payload['messages'][0]['content'] = 'Summarize this material and quote supporting source passages.\n\n' + text
from urllib.request import Request, urlopen
from urllib.error import HTTPError
api_key = os.environ['AILOOT_API_KEY']
if not api_key.strip():
raise SystemExit('Set AILOOT_API_KEY before making a request')
headers = {'x-api-key': 'PLACEHOLDER_KEY', 'anthropic-version': '2023-06-01', 'Content-Type': 'application/json'}
headers['x-api-key'] = api_key
request = Request('https://api.ailoot.ai/v1/messages', data=json.dumps(payload, ensure_ascii=False).encode('utf-8'), headers=headers, method='POST')
try:
with urlopen(request, timeout=120) as response:
raw = response.read()
Path('response-headers.txt').write_text(str(response.headers), encoding='utf-8')
except HTTPError as error:
Path('result.json').write_bytes(error.read())
Path('response-headers.txt').write_text(str(error.headers), encoding='utf-8')
raise
Path('result.json').write_bytes(raw)
import json
from pathlib import Path
result = json.loads(Path('result.json').read_text(encoding='utf-8'))
print(json.dumps(result, ensure_ascii=False, indent=2))
接收並儲存結果
Ailoot Ultra · Anthropic Messages
JSON 或 SSE
保留所有已完成的結果
請保留所有完整傳回的回應、檔案與內容區塊。
保留所有內容區塊、思考簽章與實際工具使用 ID。組合所有 SSE 區塊增量;第一個文字區塊不是完整輸出。
需要檢查原始回應時
保留請求/回應 ID 與標頭。未提供通用的文字工作擷取 URL。
回應欄位
| 欄位 | 類型 |
|---|---|
欄位id | 類型string |
欄位model | 類型string |
欄位content[] | 類型text|thinking|tool_use|other content block |
欄位stop_reason | 類型string|null |
欄位usage | 類型object |
錯誤與後續步驟
| 回應 | 條件 | 下一步 |
|---|---|---|
回應400 · invalid_request_error | 條件必要欄位、素材表示方式或參數值無效 | 下一步提出新的建立請求前,先修正指定欄位。 |
別名
模型別名
Ailoot Ultra poolside/laguna-s-2.1
方法路徑別名
請使用上方列出的 API 方法路徑。
相關呼叫用 ID
FAQ · Poolside: Laguna S 2.1
- 可以使用哪些輸入與結果?
POST /v1/chat/completions·poolside/laguna-s-2.1:text→textPOST /v1/messages·poolside/laguna-s-2.1:text→json,sse- 請求使用哪些欄位?
POST /v1/chat/completions·poolside/laguna-s-2.1:model,messages,stream,modalities,providerPOST /v1/messages·poolside/laguna-s-2.1:model,messages,max_tokens,stream- 適用哪些限制?
POST /v1/chat/completions·poolside/laguna-s-2.1:messages.min_items:1