模型

Qwen3-4B

Markdown · JSON

Qwen3-4B

Qwen3-4B 是具備四十億參數的文字模型,適用於指令遵循、多語言對話與程式碼。其混合設計同時支援直接回答與思考模式,並提供此版本專屬的重複內容控制建議。

關於模型

此說明介紹模型的能力。Ailoot 可用的輸入、輸出與選項,依所選方法列於下方。

Qwen3-4B 將 Qwen3 的混合回覆設計應用於精簡的稠密語言模型。製造商描述其能力涵蓋數學與邏輯推理、程式碼生成、創意寫作、角色互動與多輪對話,並能以超過 100 種語言及方言遵循指令。聚焦的編輯或技術任務很適合此模型:提供明確的來源片段,要求一項定義清楚的轉換,而不是開放式概述。

此版本具有四十億個參數,其中非嵌入部分為 3.6B,並有 36 層。群組查詢注意力使用 32 個查詢頭及八個鍵/值頭。輸入與輸出都是文字。本卡描述原始 Qwen3-4B 混合版本,而不是後來帶日期的 Thinking 或 Instruct 模型。一個實用範例是將簡短事件筆記轉為操作交接,包含觀察到的故障、已知影響及下一個調查步驟。請將這些事實分別提供為欄位,並要求模型標記缺少的資訊,而不是自行填補。

請將指令與來源資料分成對話訊息中的不同部分。處理程式設計時,附上小型函式、具代表性的輸入與預期回傳值,再要求說明或範圍明確的修改。將一般情況與邊界情況列為輸出的一部分。處理寫作時,請說明對象、長度與必須維持不變的詞彙。處理分類時,提供允許的標籤、定義及輸出範例,再核對回傳選項是否在清單內。公布的整合方式需要能辨識 Qwen3 的執行環境;模型卡提醒,低於 4.51.0 的 Transformers 版本無法識別所需架構。

思考與非思考功能內建於同一版本。製造商的範本預設開啟思考,並提供可將其關閉的硬性開關。開啟思考時,/think 與 /no_think 是可在各輪之間改變行為的軟性指令,並以最新指令為準。它們無法重新啟用被硬性關閉的模式。簡短文字轉換可要求直接答案,衝突條件的說明則可運用推理。請將最終回覆保存為該輪對話的實用成果,而不是先前的推理文字。開啟思考時,即使軟性要求不思考,仍會保留推理區塊,只是內容可能為空;硬性關閉則會移除該區塊。

模型卡將代理使用納入範圍,並建議使用 Qwen-Agent 定義及剖析工具。若助理先分類收到的案件,再查詢類別說明,應用程式需提供查詢工具、執行接受的呼叫並回傳結果。請事先定義引數與預期欄位,要求最終案件紀錄包含所選類別、簡短理由與未知欄位。驗證紀錄,並保留產生紀錄時使用的工具結果。Qwen3 指南也說明平行與多步驟工具呼叫,引數以物件表示,結果則回傳至對話。

此確切模型卡列出 32,768 個原生上下文 token,並記載可透過 YaRN 擴展至 131,072。擴展數值取決於設定;靜態縮放可能影響較短輸入。請共同規劃完整請求與回覆。處理一組簡短筆記時,為各項加上標籤,要求對應的輸出識別碼,並使用精簡結構描述,讓生成結果仍能容納於可用空間。模型卡的輸出長度範例與建議,不是通用的硬性生成上限。Qwen3 文件在解釋訓練長度時,討論了思考模式 38,912 個 token 與非思考模式 16,384 個 token 的助理訊息長度,並建議評估更長生成的品質。這些數值與整體上下文視窗不同,也不是特定端點的硬性上限。模型卡另外說明,預設位置配置為 40,960 個 token,由一般提示的 8,192 加上輸出的 32,768 組成;這是製造商設定指引,與原生訓練上下文及任何端點限制分開。

此版本另外提醒持續重複的問題。製造商建議遵循推薦的取樣設定,若出現明顯重複,可考慮 presence_penalty 1.5。一般指引指出,較強懲罰可能造成混合語言輸出或降低品質,因此這是針對特定情況的設定,而不是保證。思考模式使用 temperature 0.6、top-p 0.95、top-k 20 與 min-p 0;非思考模式則使用 0.7、0.8、20 與 0。推理時請避免貪婪解碼,要求明確分隔的最終答案,並檢查重複語句、缺少欄位與術語變動。

實用任務

實用任務

英文技術範例

Turn an incident note into a handoff

Turn these facts into an operational handoff. Observed failure: report export stops with Disk full. Known impact: exports for Team C failed; other teams were not checked. Last completed step: temporary files listed, none deleted. Next step: identify approved cleanup candidates. Use four labelled lines and do not invent a restoration time or wider impact.

預期結果

Four labelled lines: Failure, Confirmed impact, Completed work and Next step.

檢查結果

Check that listing files is not reported as deleting them and untested teams remain outside confirmed impact.
Ailoot Ultra · OpenAI Chat POST /v1/chat/completions qwen3-4b

qwen3-4b

Alibaba /qwen3-4b

入門

Qwen3-4B 是具備四十億參數的文字模型,適用於指令遵循、多語言對話與程式碼。其混合設計同時支援直接回答與思考模式,並提供此版本專屬的重複內容控制建議。

接受的輸入
文字
結果
文字

Ailoot 可用 · 輸入與方法

Ailoot Ultra · OpenAI Chat POST /v1/chat/completions
輸入
text
輸出
text
輸出格式
json 或 SSE
欄位類型要求值與限制預設值
欄位model類型string要求必填值與限制
qwen3-4b
預設值—
欄位messages類型message[]要求必填值與限制
項目數下限: 1
預設值—
欄位messages[].role類型string要求必填值與限制
範例:system, user, assistant, tool, function
條件: 這些角色由 原始碼中的相容型別明確表示;確切角色集合仍依模型而定。
依模型而定
預設值—
欄位messages[].content類型string|content_part[]|null要求選填值與限制預設值—
欄位messages[].tool_calls類型tool_call[]要求選填值與限制預設值—
欄位messages[].tool_call_id類型string要求選填值與限制
適用條件: role=tool;使用實際回傳的 ID
預設值—
欄位messages[].name類型string要求選填值與限制預設值—
欄位messages[].reasoning_content類型string要求選填值與限制
適用條件: 此模型使用推理內容時,將實際回傳的推理內容帶回後續請求
預設值—
欄位messages[].reasoning_details類型object|array要求選填值與限制
依模型而定
預設值—
欄位max_tokens類型integer要求選填值與限制
最小值: 1
依模型而定
預設值—
欄位max_completion_tokens類型integer要求選填值與限制
最小值: 1
依模型而定
預設值—
欄位stream類型boolean要求選填值與限制預設值false
欄位stream_options.include_usage類型boolean要求選填值與限制
依模型而定
預設值—
欄位temperature類型number要求選填值與限制
依模型而定
預設值—
欄位top_p類型number要求選填值與限制
依模型而定
預設值—
欄位stop類型string|string[]要求選填值與限制
依模型而定
預設值—
欄位tools類型function_tool[]要求選填值與限制
依模型而定
預設值—
欄位tools[].type類型string要求選填值與限制
function
依模型而定
預設值—
欄位tools[].function.name類型string要求必填值與限制
適用條件: 已提供函式工具
預設值—
欄位tools[].function.description類型string要求選填值與限制預設值—
欄位tools[].function.parameters類型JSON_schema要求選填值與限制預設值—
欄位tool_choice類型string|object要求選填值與限制
依模型而定
預設值—
欄位parallel_tool_calls類型boolean要求選填值與限制
依模型而定
預設值—
欄位response_format類型object要求選填值與限制
依模型而定
預設值—
欄位reasoning_effort類型string要求選填值與限制
依模型而定
預設值—
欄位reasoning類型object要求選填值與限制
依模型而定
預設值—
欄位service_tier類型string要求選填值與限制
依模型而定
預設值—
欄位instructions類型string要求選填值與限制
相容性欄位
預設值—
欄位functions類型function[]要求選填值與限制
依模型而定
預設值—
欄位function_call類型string|object要求選填值與限制
依模型而定
預設值—
欄位prompt_cache_options類型object要求選填值與限制
依模型而定
預設值—
欄位modalities類型string[]要求選填值與限制
text
預設值—
欄位provider類型object要求選填值與限制
條件: 此 Ultra 文字路由拒絕 provider.options
預設值—
欄位cache_control.ttl類型string要求選填值與限制
條件: 實際提示詞快取位置拒絕 1h
預設值—
輸入素材組合

文字 · UTF8 文字

messages[].content

方法參數與生命週期
參數規格
參數content_type規格application/json
參數required規格model, messages
參數material_types規格text
參數messages規格具有 role/content 結構的訊息陣列
參數file_material規格實際 UTF-8 文件以原文文字插入;不推定檔案 ID
參數optional_controls規格stream, temperature, top_p, stop, max_tokens, max_completion_tokens, reasoning, response_format, tools, tool_choice
參數control_scope規格依模型而定;使用者函式工具與託管工具不同
參數output_modalities規格text
參數hosted_operations規格false
參數multimodal_input_binding規格null

生命週期: synchronous_or_streamed

將確切模型 ID 與 messages 一併送出。

上下文長度不是輸出上限。

文字檔案可提供原文文字;圖片/音訊/檔案物件輸入需要精確綁定。

方案

費率資訊不會增加請求選項。支援的參數列於所選方法中。

快速模式
未指定 選取快速模式時
flex 模式
未指定 選取 flex 模式時
最高推理強度
未指定 最高推理強度採用 default 調整值時

Ailoot 費率

各設定的價格

設定費率表費用
設定詞元基本費率費率表基本費率費用
輸入 · 輸入 Token $0.0001 / 1K Token
輸出 · 輸出 Token $0.001 / 1K Token
輸入 · 讀取快取 $0 / 1K Token
輸入 · 寫入快取 $0 / 1K Token
輸入 · 寫入快取,1 小時 — / 1K Token

Ailoot 會在請求前預留估算金額。取得結果後,依實測用量結算最終費用。串流結算採用最終用量紀錄。預留金額與結算的運作方式 →

請求範例

Ailoot Ultra · OpenAI Chat

curlPython SDKPython 串流
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "qwen3-4b", "messages": [{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}]}')

Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
r=json.loads(Path("result.json").read_text())
for x in r.get("choices",[]):
    if x.get("message",{}).get("content"): print(x["message"]["content"])
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
result=client.chat.completions.create(model='qwen3-4b',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}])
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(result.to_dict(mode="json"))
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='qwen3-4b',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

接收並儲存結果

Ailoot Ultra · OpenAI Chat

json 或 SSE

保留所有已完成的結果

請保留所有完整傳回的回應、檔案與內容區塊。

保留每個候選項及其內容/工具呼叫/推理。SSE 中依候選項/工具索引組合增量,保留最終完成原因與用量。

需要檢查原始回應時

保留請求/回應 ID 與標頭。未提供通用的文字工作擷取 URL。

回應欄位
欄位類型
欄位choices[].index類型integer
欄位choices[].message.content類型string|null
欄位choices[].message.tool_calls類型tool_call[]
欄位choices[].message.reasoning_content類型string
欄位choices[].message.reasoning_details類型object|array
欄位choices[].finish_reason類型string|null
欄位usage類型object
錯誤與後續步驟
回應條件下一步
回應400 · invalid_request_error條件必要欄位、素材表示方式或參數值無效下一步提出新的建立請求前,先修正指定欄位。

別名

模型別名

Ailoot Ultra qwen3-4b

方法路徑別名

請使用上方列出的 API 方法路徑。

相關呼叫用 ID

qwen3-4b

Ailoot Ultra · Anthropic Messages POST /v1/messages qwen3-4b

qwen3-4b

Alibaba /qwen3-4b

入門

Qwen3-4B 是具備四十億參數的文字模型,適用於指令遵循、多語言對話與程式碼。其混合設計同時支援直接回答與思考模式,並提供此版本專屬的重複內容控制建議。

接受的輸入
文字
結果
json · sse

Ailoot 可用 · 輸入與方法

Ailoot Ultra · Anthropic Messages POST /v1/messages
輸入
text
輸出
json, sse
輸出格式
JSON 或 SSE
欄位類型要求值與限制預設值
欄位model類型string要求必填值與限制
qwen3-4b
預設值—
欄位messages類型message[]要求必填值與限制預設值—
欄位messages[].role類型string要求必填值與限制
user, assistant
預設值—
欄位messages[].content類型string要求必填值與限制預設值—
欄位max_tokens類型integer要求必填值與限制預設值—
欄位stream類型boolean要求選填值與限制預設值false
輸入素材組合

文字 · UTF-8 文字

messages[].content 字串

方法參數與生命週期
參數規格
參數content_type規格application/json
參數required規格model, messages, max_tokens
參數optional_controls規格stream
參數material_types規格text
參數text_file_material規格讀取實際 UTF-8 文件,將文字放入指定的 input 或訊息內容字串。

生命週期: synchronous_or_streamed

方案

費率資訊不會增加請求選項。支援的參數列於所選方法中。

快速模式
未指定 選取快速模式時
flex 模式
未指定 選取 flex 模式時
最高推理強度
未指定 最高推理強度採用 default 調整值時

Ailoot 費率

各設定的價格

設定費率表費用
設定詞元基本費率費率表基本費率費用
輸入 · 輸入 Token $0.0001 / 1K Token
輸出 · 輸出 Token $0.001 / 1K Token
輸入 · 讀取快取 $0 / 1K Token
輸入 · 寫入快取 $0 / 1K Token
輸入 · 寫入快取,1 小時 — / 1K Token

Ailoot 會在請求前預留估算金額。取得結果後,依實測用量結算最終費用。串流結算採用最終用量紀錄。預留金額與結算的運作方式 →

請求範例

Ailoot Ultra · Anthropic Messages

完整的最小 JSON 請求主體curl · 使用您的 UTF-8 文件Python · 儲存完整結果
{
  "model": "qwen3-4b",
  "max_tokens": 128,
  "messages": [
    {
      "role": "user",
      "content": "Summarize the incident report."
    }
  ],
  "stream": false
}
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 document}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json, os
from pathlib import Path

source_file = Path(os.environ['AILOOT_TEXT_FILE'])
if not source_file.is_file():
    raise SystemExit('Set AILOOT_TEXT_FILE to your actual UTF-8 document')
text = source_file.read_text(encoding='utf-8')
if not text.strip():
    raise SystemExit('Choose a document containing text')
payload = {'model': 'qwen3-4b', 'max_tokens': 128, 'messages': [{'role': 'user', 'content': 'Summarize the incident report.'}]}
payload['messages'][0]['content'] = 'Summarize this material and quote supporting source passages.\n\n' + text
Path('request.json').write_text(json.dumps(payload, ensure_ascii=False), encoding='utf-8')
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path

result = json.loads(Path('result.json').read_text(encoding='utf-8'))
print(json.dumps(result, ensure_ascii=False, indent=2))
PY_RESULT
import json, os
from pathlib import Path

source_file = Path(os.environ['AILOOT_TEXT_FILE'])
if not source_file.is_file():
    raise SystemExit('Set AILOOT_TEXT_FILE to your actual UTF-8 document')
text = source_file.read_text(encoding='utf-8')
if not text.strip():
    raise SystemExit('Choose a document containing text')
payload = {'model': 'qwen3-4b', 'max_tokens': 128, 'messages': [{'role': 'user', 'content': 'Summarize the incident report.'}]}
payload['messages'][0]['content'] = 'Summarize this material and quote supporting source passages.\n\n' + text
from urllib.request import Request, urlopen
from urllib.error import HTTPError

api_key = os.environ['AILOOT_API_KEY']
if not api_key.strip():
    raise SystemExit('Set AILOOT_API_KEY before making a request')
headers = {'x-api-key': 'PLACEHOLDER_KEY', 'anthropic-version': '2023-06-01', 'Content-Type': 'application/json'}
headers['x-api-key'] = api_key
request = Request('https://api.ailoot.ai/v1/messages', data=json.dumps(payload, ensure_ascii=False).encode('utf-8'), headers=headers, method='POST')
try:
    with urlopen(request, timeout=120) as response:
        raw = response.read()
        Path('response-headers.txt').write_text(str(response.headers), encoding='utf-8')
except HTTPError as error:
    Path('result.json').write_bytes(error.read())
    Path('response-headers.txt').write_text(str(error.headers), encoding='utf-8')
    raise
Path('result.json').write_bytes(raw)
import json
from pathlib import Path

result = json.loads(Path('result.json').read_text(encoding='utf-8'))
print(json.dumps(result, ensure_ascii=False, indent=2))

接收並儲存結果

Ailoot Ultra · Anthropic Messages

JSON 或 SSE

保留所有已完成的結果

請保留所有完整傳回的回應、檔案與內容區塊。

保留所有內容區塊、思考簽章與實際工具使用 ID。組合所有 SSE 區塊增量;第一個文字區塊不是完整輸出。

需要檢查原始回應時

保留請求/回應 ID 與標頭。未提供通用的文字工作擷取 URL。

回應欄位
欄位類型
欄位id類型string
欄位model類型string
欄位content[]類型text|thinking|tool_use|other content block
欄位stop_reason類型string|null
欄位usage類型object
錯誤與後續步驟
回應條件下一步
回應400 · invalid_request_error條件必要欄位、素材表示方式或參數值無效下一步提出新的建立請求前,先修正指定欄位。

別名

模型別名

Ailoot Ultra qwen3-4b

方法路徑別名

請使用上方列出的 API 方法路徑。

相關呼叫用 ID

qwen3-4b

FAQ · Qwen3-4B
可以使用哪些輸入與結果?

POST /v1/chat/completions · qwen3-4b: text → text

POST /v1/messages · qwen3-4b: text → json, sse

請求使用哪些欄位?

POST /v1/chat/completions · qwen3-4b: model, messages, stream, modalities, provider

POST /v1/messages · qwen3-4b: model, messages, max_tokens, stream

適用哪些限制?

POST /v1/chat/completions · qwen3-4b: messages.min_items: 1

更多詳情

將 Ailoot 串接 Claude Code、OpenCode、Hermes 或自己的應用程式。

公司及其專案組合

公司及其專案組合:數百萬客戶,每月銷售額達數十億。

優惠購買 token。

訂閱優惠適合持續工作,折扣碼購買 token 最高可折 50%。

訂閱
為定期請求選擇優惠方案。
最高 50% 折扣碼
購買時輸入代碼,價格依活動重算。
歷史中的費用
每次請求保存模型、token 與金額。

選擇訂閱 · 查看模型價格

將 API 加入 你銷售的產品。

依 Ailoot 正式服務條款與授權合約串接 SaaS、應用程式與機器人;轉售請申請經銷授權。

商用應用程式
在付費功能加入文字、圖片、影片與聲音生成。
經銷授權
提供專案說明與存取方式,要求書面使用和轉售條件。
網站文件
串接前可閱讀正式服務條款、授權合約與資料處理政策。

申請經銷授權 · 正式服務條款與授權合約