mô hình

MoonshotAI: Kimi K2.7 Code Highspeed

Markdown · JSON

kimi-for-coding-highspeed

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Về mô hình

Mô tả này trình bày khả năng của mô hình. Đầu vào, đầu ra và tùy chọn có trên Ailoot được liệt kê bên dưới cho phương thức đã chọn.

Phát triển phần mềm dài với đầu ra nhanh

kimi-for-coding-highspeed chỉ Kimi K2.7 Code tăng tốc. Mô hình dành cho tác vụ kéo dài qua nhiều hành động: tái cấu trúc cơ sở mã, triển khai chức năng trên nhiều tệp và tìm lỗi trong phiên kỹ thuật dài. Theo Moonshot AI, biến thể tăng tốc giữ các khả năng của K2.7 Code và xuất câu trả lời nhanh hơn khoảng 5–6 lần.

Chuyên môn về mã gồm hệ thống máy chủ, hạ tầng, tối ưu hiệu năng, lập trình hệ thống, an toàn, giao diện người dùng và tác vụ xử lý dữ liệu. Mô hình được thiết kế để làm theo yêu cầu trong ngữ cảnh dài và sử dụng kết quả công cụ tuần tự.

Suy luận được giữ giữa các bước

Trong K2.7 Code, suy luận luôn được bật. Mô hình sử dụng suy luận giữa các lần gọi công cụ và giữ trong lịch sử hội thoại nhiều bước. Mô hình này không có chế độ trả lời tức thì không suy luận. Ứng dụng cần trả lại đầy đủ các tin nhắn trước để bước tiếp theo xét được tiến trình công việc.

Kiến trúc và đầu vào

K2.7 Code được xây dựng theo hỗn hợp chuyên gia có tổng cộng 1 nghìn tỷ tham số và 32 tỷ hoạt động. Mô hình sử dụng Multi-head Latent Attention và bộ mã hóa hình ảnh MoonViT. Ngữ cảnh được công bố của biến thể tăng tốc là 262 144 token.

Ở phía nhà sản xuất, K2.7 Code được công bố hiểu ảnh và video; trong hướng dẫn mô hình, đầu vào video được đánh dấu là chế độ thử nghiệm của một cách truy cập riêng. Thẻ này cung cấp văn bản và ảnh. Mô hình tạo câu trả lời văn bản và có thể điều khiển hàm kết nối. Môi trường bên ngoài thực thi lệnh, áp dụng chỉnh sửa và kiểm tra kết quả. Đầu ra văn bản nhanh ảnh hưởng đến thời gian chờ câu trả lời, nhưng thời gian toàn bộ tác vụ còn phụ thuộc vào các hành động đó.

Tác vụ thực tế

Tác vụ thực tế

Ví dụ kỹ thuật bằng tiếng Anh

Remove repeated lookups in a data-processing loop

Review this pseudocode: for each order, fetch_customer(order.customer_id), then append the customer name to its export row. Many orders share a customer, and repeated fetches dominate runtime. Propose a scoped improvement that preserves row order and handles missing customers. Give a test with three orders sharing two customer IDs; do not claim execution.

Kết quả mong đợi

Revised pseudocode, an explanation of lookup reuse and tests for shared IDs and missing customers.

Kiểm tra kết quả

The shared-ID test requires at most one lookup per distinct customer ID and unchanged export-row order.
Ailoot · Anthropic Messages POST /v1/messages kimi-for-coding-highspeed

kimi-for-coding-highspeed

Moonshot /kimi-for-coding-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · Anthropic Messages POST /v1/messages
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-for-coding-highspeed
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
user, assistant
Mặc định—
Trườngmessages[].contentLoạistring|content_block[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườngsystemLoạistring|content_block[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmax_tokensLoạiintegerYêu cầuBắt buộcGiá trị & giới hạn
Tối thiểu: 1
Giới hạn áp dụng cho: Giới hạn trên chính xác của mô hình hoặc thẻ được chọn
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngstop_sequencesLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ
Mặc định—
Trườngtools[].descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].input_schemaLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.budget_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngoutput_config.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngmetadataLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngcache_controlLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content hoặc khối type=text

Văn bản + ảnh

{type:image,source:{type:base64,media_type,data}} hoặc nguồn có type=url

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages, max_tokens
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot Anthropic MessagesPOST /v1/messages
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · Anthropic Messages

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-for-coding-highspeed", "max_tokens": 1024, "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-for-coding-highspeed", "max_tokens": 1024, "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image","source":{"type":"base64","media_type":mime,"data":b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
import anthropic
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = anthropic.Anthropic(base_url="https://api.ailoot.ai", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
msg = client.messages.create(
    model="kimi-for-coding-highspeed",
    max_tokens=1024,
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(msg.to_dict(mode="json"))
import Anthropic from "@anthropic-ai/sdk";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new Anthropic({ baseURL: "https://api.ailoot.ai", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const msg = await client.messages.create({
  model: "kimi-for-coding-highspeed",
  max_tokens: 1024,
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(msg);
import anthropic,os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=anthropic.Anthropic(base_url="https://api.ailoot.ai",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.messages.stream(model='kimi-for-coding-highspeed',max_tokens=1024,messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_message()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · Anthropic Messages

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi khối nội dung, chữ ký suy nghĩ và ID sử dụng công cụ thực tế. Ghép tất cả các phần thay đổi của khối SSE; khối văn bản đầu tiên không phải toàn bộ đầu ra.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngmodelLoạistring
Trườngcontent[]Loạitext|thinking|tool_use|other content block
Trườngstop_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Responses POST /v1/responses kimi-for-coding-highspeed

kimi-for-coding-highspeed

Moonshot /kimi-for-coding-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Responses POST /v1/responses
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-for-coding-highspeed
Mặc định—
TrườnginputLoạistring|input_item[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
message, reasoning, function_call, function_call_output
Mặc định—
Trườnginput[].contentLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output; giữ call_id thực tế được trả về
Mặc định—
Trườnginput[].outputLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output
Mặc định—
Trườngmax_output_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.summaryLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.verbosityLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngincludeLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstoreLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprevious_response_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Yêu cầu về ID: Chỉ ID phản hồi thực tế từ một lượt tiếp tục được hỗ trợ
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_keyLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

Văn bản đầu vào hoặc phần input_text

Văn bản + ảnh

{type:input_image,image_url}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, input
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ResponsesPOST /v1/responses
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Responses

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-for-coding-highspeed", "input": ""}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["input"]="Summarize this material and quote supporting source passages.\n\n"+text
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-for-coding-highspeed", "input": [{"role": "user", "content": [{"type": "input_text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["input"][0]["content"].append({"type":"input_image","image_url":"data:"+mime+";base64,"+b64})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.responses.create(model="kimi-for-coding-highspeed", input="Explain the difference between an observation and a hypothesis in three sentences.")
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.responses.create({ model: "kimi-for-coding-highspeed", input: "Explain the difference between an observation and a hypothesis in three sentences." });
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
with client.responses.stream(model="kimi-for-coding-highspeed", input="Explain the difference between an observation and a hypothesis in three sentences.") as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_response()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Responses

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ từng mục đầu ra và phần nội dung, call_id hàm thực tế, dữ liệu suy luận được mã hóa và dữ liệu sử dụng. Khi truyền luồng, giữ đầy đủ thông tin định danh của sự kiện và mục.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngstatusLoạistring
Trườngoutput[]Loạimessage|reasoning|function_call|other item
Trườngoutput[].content[]Loạicontent part
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Chat POST /v1/chat/completions kimi-for-coding-highspeed

kimi-for-coding-highspeed

Moonshot /kimi-for-coding-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-for-coding-highspeed
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Văn bản + ảnh

{type:image_url,image_url:{url,detail}}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-for-coding-highspeed", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-for-coding-highspeed", "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image_url","image_url":{"url":"data:"+mime+";base64,"+b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="kimi-for-coding-highspeed",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "kimi-for-coding-highspeed",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='kimi-for-coding-highspeed',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · Anthropic Messages POST /v1/messages kimi-highspeed

kimi-highspeed

Moonshot /kimi-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · Anthropic Messages POST /v1/messages
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-highspeed
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
user, assistant
Mặc định—
Trườngmessages[].contentLoạistring|content_block[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườngsystemLoạistring|content_block[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmax_tokensLoạiintegerYêu cầuBắt buộcGiá trị & giới hạn
Tối thiểu: 1
Giới hạn áp dụng cho: Giới hạn trên chính xác của mô hình hoặc thẻ được chọn
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngstop_sequencesLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ
Mặc định—
Trườngtools[].descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].input_schemaLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.budget_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngoutput_config.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngmetadataLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngcache_controlLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content hoặc khối type=text

Văn bản + ảnh

{type:image,source:{type:base64,media_type,data}} hoặc nguồn có type=url

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages, max_tokens
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot Anthropic MessagesPOST /v1/messages
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · Anthropic Messages

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed", "max_tokens": 1024, "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed", "max_tokens": 1024, "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image","source":{"type":"base64","media_type":mime,"data":b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
import anthropic
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = anthropic.Anthropic(base_url="https://api.ailoot.ai", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
msg = client.messages.create(
    model="kimi-highspeed",
    max_tokens=1024,
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(msg.to_dict(mode="json"))
import Anthropic from "@anthropic-ai/sdk";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new Anthropic({ baseURL: "https://api.ailoot.ai", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const msg = await client.messages.create({
  model: "kimi-highspeed",
  max_tokens: 1024,
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(msg);
import anthropic,os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=anthropic.Anthropic(base_url="https://api.ailoot.ai",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.messages.stream(model='kimi-highspeed',max_tokens=1024,messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_message()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · Anthropic Messages

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi khối nội dung, chữ ký suy nghĩ và ID sử dụng công cụ thực tế. Ghép tất cả các phần thay đổi của khối SSE; khối văn bản đầu tiên không phải toàn bộ đầu ra.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngmodelLoạistring
Trườngcontent[]Loạitext|thinking|tool_use|other content block
Trườngstop_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Responses POST /v1/responses kimi-highspeed

kimi-highspeed

Moonshot /kimi-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Responses POST /v1/responses
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-highspeed
Mặc định—
TrườnginputLoạistring|input_item[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
message, reasoning, function_call, function_call_output
Mặc định—
Trườnginput[].contentLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output; giữ call_id thực tế được trả về
Mặc định—
Trườnginput[].outputLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output
Mặc định—
Trườngmax_output_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.summaryLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.verbosityLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngincludeLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstoreLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprevious_response_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Yêu cầu về ID: Chỉ ID phản hồi thực tế từ một lượt tiếp tục được hỗ trợ
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_keyLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

Văn bản đầu vào hoặc phần input_text

Văn bản + ảnh

{type:input_image,image_url}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, input
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ResponsesPOST /v1/responses
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Responses

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed", "input": ""}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["input"]="Summarize this material and quote supporting source passages.\n\n"+text
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed", "input": [{"role": "user", "content": [{"type": "input_text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["input"][0]["content"].append({"type":"input_image","image_url":"data:"+mime+";base64,"+b64})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.responses.create(model="kimi-highspeed", input="Explain the difference between an observation and a hypothesis in three sentences.")
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.responses.create({ model: "kimi-highspeed", input: "Explain the difference between an observation and a hypothesis in three sentences." });
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
with client.responses.stream(model="kimi-highspeed", input="Explain the difference between an observation and a hypothesis in three sentences.") as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_response()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Responses

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ từng mục đầu ra và phần nội dung, call_id hàm thực tế, dữ liệu suy luận được mã hóa và dữ liệu sử dụng. Khi truyền luồng, giữ đầy đủ thông tin định danh của sự kiện và mục.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngstatusLoạistring
Trườngoutput[]Loạimessage|reasoning|function_call|other item
Trườngoutput[].content[]Loạicontent part
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Chat POST /v1/chat/completions kimi-highspeed

kimi-highspeed

Moonshot /kimi-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-highspeed
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Văn bản + ảnh

{type:image_url,image_url:{url,detail}}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed", "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image_url","image_url":{"url":"data:"+mime+";base64,"+b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="kimi-highspeed",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "kimi-highspeed",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='kimi-highspeed',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · Anthropic Messages POST /v1/messages kimi-highspeed-latest

kimi-highspeed-latest

Moonshot /kimi-highspeed-latest
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · Anthropic Messages POST /v1/messages
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-highspeed-latest
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
user, assistant
Mặc định—
Trườngmessages[].contentLoạistring|content_block[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườngsystemLoạistring|content_block[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmax_tokensLoạiintegerYêu cầuBắt buộcGiá trị & giới hạn
Tối thiểu: 1
Giới hạn áp dụng cho: Giới hạn trên chính xác của mô hình hoặc thẻ được chọn
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngstop_sequencesLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ
Mặc định—
Trườngtools[].descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].input_schemaLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.budget_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngoutput_config.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngmetadataLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngcache_controlLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content hoặc khối type=text

Văn bản + ảnh

{type:image,source:{type:base64,media_type,data}} hoặc nguồn có type=url

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages, max_tokens
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot Anthropic MessagesPOST /v1/messages
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · Anthropic Messages

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed-latest", "max_tokens": 1024, "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed-latest", "max_tokens": 1024, "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image","source":{"type":"base64","media_type":mime,"data":b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
import anthropic
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = anthropic.Anthropic(base_url="https://api.ailoot.ai", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
msg = client.messages.create(
    model="kimi-highspeed-latest",
    max_tokens=1024,
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(msg.to_dict(mode="json"))
import Anthropic from "@anthropic-ai/sdk";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new Anthropic({ baseURL: "https://api.ailoot.ai", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const msg = await client.messages.create({
  model: "kimi-highspeed-latest",
  max_tokens: 1024,
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(msg);
import anthropic,os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=anthropic.Anthropic(base_url="https://api.ailoot.ai",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.messages.stream(model='kimi-highspeed-latest',max_tokens=1024,messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_message()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · Anthropic Messages

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi khối nội dung, chữ ký suy nghĩ và ID sử dụng công cụ thực tế. Ghép tất cả các phần thay đổi của khối SSE; khối văn bản đầu tiên không phải toàn bộ đầu ra.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngmodelLoạistring
Trườngcontent[]Loạitext|thinking|tool_use|other content block
Trườngstop_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Responses POST /v1/responses kimi-highspeed-latest

kimi-highspeed-latest

Moonshot /kimi-highspeed-latest
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Responses POST /v1/responses
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-highspeed-latest
Mặc định—
TrườnginputLoạistring|input_item[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
message, reasoning, function_call, function_call_output
Mặc định—
Trườnginput[].contentLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output; giữ call_id thực tế được trả về
Mặc định—
Trườnginput[].outputLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output
Mặc định—
Trườngmax_output_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.summaryLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.verbosityLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngincludeLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstoreLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprevious_response_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Yêu cầu về ID: Chỉ ID phản hồi thực tế từ một lượt tiếp tục được hỗ trợ
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_keyLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

Văn bản đầu vào hoặc phần input_text

Văn bản + ảnh

{type:input_image,image_url}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, input
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ResponsesPOST /v1/responses
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Responses

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed-latest", "input": ""}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["input"]="Summarize this material and quote supporting source passages.\n\n"+text
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed-latest", "input": [{"role": "user", "content": [{"type": "input_text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["input"][0]["content"].append({"type":"input_image","image_url":"data:"+mime+";base64,"+b64})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.responses.create(model="kimi-highspeed-latest", input="Explain the difference between an observation and a hypothesis in three sentences.")
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.responses.create({ model: "kimi-highspeed-latest", input: "Explain the difference between an observation and a hypothesis in three sentences." });
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
with client.responses.stream(model="kimi-highspeed-latest", input="Explain the difference between an observation and a hypothesis in three sentences.") as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_response()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Responses

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ từng mục đầu ra và phần nội dung, call_id hàm thực tế, dữ liệu suy luận được mã hóa và dữ liệu sử dụng. Khi truyền luồng, giữ đầy đủ thông tin định danh của sự kiện và mục.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngstatusLoạistring
Trườngoutput[]Loạimessage|reasoning|function_call|other item
Trườngoutput[].content[]Loạicontent part
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Chat POST /v1/chat/completions kimi-highspeed-latest

kimi-highspeed-latest

Moonshot /kimi-highspeed-latest
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-highspeed-latest
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Văn bản + ảnh

{type:image_url,image_url:{url,detail}}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed-latest", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-highspeed-latest", "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image_url","image_url":{"url":"data:"+mime+";base64,"+b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="kimi-highspeed-latest",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "kimi-highspeed-latest",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='kimi-highspeed-latest',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · Anthropic Messages POST /v1/messages kimi-k2.7-code-highspeed

kimi-k2.7-code-highspeed

Moonshot /kimi-k2.7-code-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · Anthropic Messages POST /v1/messages
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-k2.7-code-highspeed
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
user, assistant
Mặc định—
Trườngmessages[].contentLoạistring|content_block[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườngsystemLoạistring|content_block[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmax_tokensLoạiintegerYêu cầuBắt buộcGiá trị & giới hạn
Tối thiểu: 1
Giới hạn áp dụng cho: Giới hạn trên chính xác của mô hình hoặc thẻ được chọn
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngstop_sequencesLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ
Mặc định—
Trườngtools[].descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].input_schemaLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngthinking.budget_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngoutput_config.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngmetadataLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngcache_controlLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content hoặc khối type=text

Văn bản + ảnh

{type:image,source:{type:base64,media_type,data}} hoặc nguồn có type=url

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages, max_tokens
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot Anthropic MessagesPOST /v1/messages
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · Anthropic Messages

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-k2.7-code-highspeed", "max_tokens": 1024, "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-k2.7-code-highspeed", "max_tokens": 1024, "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image","source":{"type":"base64","media_type":mime,"data":b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/messages \
  -H "x-api-key: $AILOOT_API_KEY" -H 'anthropic-version: 2023-06-01' -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
import anthropic
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = anthropic.Anthropic(base_url="https://api.ailoot.ai", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
msg = client.messages.create(
    model="kimi-k2.7-code-highspeed",
    max_tokens=1024,
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(msg.to_dict(mode="json"))
import Anthropic from "@anthropic-ai/sdk";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new Anthropic({ baseURL: "https://api.ailoot.ai", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const msg = await client.messages.create({
  model: "kimi-k2.7-code-highspeed",
  max_tokens: 1024,
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(msg);
import anthropic,os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=anthropic.Anthropic(base_url="https://api.ailoot.ai",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.messages.stream(model='kimi-k2.7-code-highspeed',max_tokens=1024,messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_message()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · Anthropic Messages

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi khối nội dung, chữ ký suy nghĩ và ID sử dụng công cụ thực tế. Ghép tất cả các phần thay đổi của khối SSE; khối văn bản đầu tiên không phải toàn bộ đầu ra.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngmodelLoạistring
Trườngcontent[]Loạitext|thinking|tool_use|other content block
Trườngstop_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Responses POST /v1/responses kimi-k2.7-code-highspeed

kimi-k2.7-code-highspeed

Moonshot /kimi-k2.7-code-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Responses POST /v1/responses
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-k2.7-code-highspeed
Mặc định—
TrườnginputLoạistring|input_item[]Yêu cầuBắt buộcGiá trị & giới hạnMặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
message, reasoning, function_call, function_call_output
Mặc định—
Trườnginput[].contentLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườnginput[].call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output; giữ call_id thực tế được trả về
Mặc định—
Trườnginput[].outputLoạistring|content_part[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: function_call_output
Mặc định—
Trườngmax_output_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạitool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning.summaryLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtext.verbosityLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngincludeLoạistring[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstoreLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprevious_response_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Yêu cầu về ID: Chỉ ID phản hồi thực tế từ một lượt tiếp tục được hỗ trợ
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_keyLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

Văn bản đầu vào hoặc phần input_text

Văn bản + ảnh

{type:input_image,image_url}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, input
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ResponsesPOST /v1/responses
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Responses

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-k2.7-code-highspeed", "input": ""}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["input"]="Summarize this material and quote supporting source passages.\n\n"+text
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-k2.7-code-highspeed", "input": [{"role": "user", "content": [{"type": "input_text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["input"][0]["content"].append({"type":"input_image","image_url":"data:"+mime+";base64,"+b64})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/responses \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(json.loads(Path("result.json").read_text(encoding="utf-8")))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.responses.create(model="kimi-k2.7-code-highspeed", input="Explain the difference between an observation and a hypothesis in three sentences.")
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.responses.create({ model: "kimi-k2.7-code-highspeed", input: "Explain the difference between an observation and a hypothesis in three sentences." });
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
with client.responses.stream(model="kimi-k2.7-code-highspeed", input="Explain the difference between an observation and a hypothesis in three sentences.") as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_response()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Responses

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ từng mục đầu ra và phần nội dung, call_id hàm thực tế, dữ liệu suy luận được mã hóa và dữ liệu sử dụng. Khi truyền luồng, giữ đầy đủ thông tin định danh của sự kiện và mục.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
TrườngidLoạistring
TrườngstatusLoạistring
Trườngoutput[]Loạimessage|reasoning|function_call|other item
Trườngoutput[].content[]Loạicontent part
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Ailoot · OpenAI Chat POST /v1/chat/completions kimi-k2.7-code-highspeed

kimi-k2.7-code-highspeed

Moonshot /kimi-k2.7-code-highspeed
ID mô hình
  • kimi-for-coding-highspeed
  • kimi-highspeed
  • kimi-highspeed-latest
  • kimi-k2.7-code-highspeed

Bắt đầu

Kimi K2.7 Code tăng tốc dành cho lập trình nhiều bước và làm việc với dự án lớn.

Đầu vào được chấp nhận
Văn bản · Ảnh
Kết quả
Văn bản

Có trên Ailoot · đầu vào & phương thức

Ailoot · OpenAI Chat POST /v1/chat/completions
Đầu vào
text, image
Đầu ra
text
Ngữ cảnh
262.144 tokens
Đầu ra tối đa
65.536 tokens
Định dạng đầu ra
json hoặc SSE
TrườngLoạiYêu cầuGiá trị & giới hạnMặc định
TrườngmodelLoạistringYêu cầuBắt buộcGiá trị & giới hạn
kimi-k2.7-code-highspeed
Mặc định—
TrườngmessagesLoạimessage[]Yêu cầuBắt buộcGiá trị & giới hạn
Số mục tối thiểu: 1
Mặc định—
Trườngmessages[].roleLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Ví dụ: system, user, assistant, tool, function
Điều kiện: Các vai trò này được biểu diễn rõ trong các kiểu tương thích của mã nguồn; tập vai trò chính xác vẫn tùy từng mô hình.
Tùy thuộc vào mô hình
Mặc định—
Trườngmessages[].contentLoạistring|content_part[]|nullYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_callsLoạitool_call[]Yêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].tool_call_idLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: role=tool; dùng ID thực tế được trả về
Mặc định—
Trườngmessages[].nameLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngmessages[].reasoning_contentLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Áp dụng khi: Gửi lại dữ liệu suy luận thực tế đã được trả về khi mô hình này sử dụng dữ liệu đó
Mặc định—
Trườngmessages[].reasoning_detailsLoạiobject|arrayYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
Trườngmax_completion_tokensLoạiintegerYêu cầuKhông bắt buộcGiá trị & giới hạn
Tối thiểu: 1
Tùy thuộc vào mô hình
Mặc định—
TrườngstreamLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạnMặc địnhfalse
Trườngstream_options.include_usageLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtemperatureLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtop_pLoạinumberYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngstopLoạistring|string[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngtoolsLoạifunction_tool[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].typeLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngtools[].function.nameLoạistringYêu cầuBắt buộcGiá trị & giới hạn
Áp dụng khi: Có cung cấp công cụ hàm
Mặc định—
Trườngtools[].function.descriptionLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtools[].function.parametersLoạiJSON_schemaYêu cầuKhông bắt buộcGiá trị & giới hạnMặc định—
Trườngtool_choiceLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngparallel_tool_callsLoạibooleanYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngresponse_formatLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngreasoning_effortLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườngreasoningLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngservice_tierLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
TrườnginstructionsLoạistringYêu cầuKhông bắt buộcGiá trị & giới hạn
Trường tương thích
Mặc định—
TrườngfunctionsLoạifunction[]Yêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngfunction_callLoạistring|objectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Trườngprompt_cache_optionsLoạiobjectYêu cầuKhông bắt buộcGiá trị & giới hạn
Tùy thuộc vào mô hình
Mặc định—
Tổ hợp tư liệu đầu vào

Văn bản · Văn bản UTF8

messages[].content

Văn bản + ảnh

{type:image_url,image_url:{url,detail}}

Tham số phương thức và vòng đời
Tham sốHợp đồng
Tham sốmaterial_typesHợp đồngtext, image
Tham sốrequiredHợp đồngmodel, messages
Tham sốoptional_controlsHợp đồngnull
Tham sốcontent_typeHợp đồngapplication/json
Tham sốtext_file_materialHợp đồngNội dung UTF-8 thực tế được chèn dưới dạng văn bản; ID tệp/URLs cần được hỗ trợ chính xác riêng

Vòng đời: exact retained published method

Cấu trúc phương thức và ID là chính xác; khả năng của nhà cung cấp tách biệt với việc cho phép tiếp nhận yêu cầu.

Bảng giá

Mức phí phương thức Ailoot

Ailoot OpenAI ChatPOST /v1/chat/completions
Đầu vào
0,0019 US$ / 1K
Đầu ra
0,008 US$ / 1K
Đọc bộ nhớ đệm
0,00038 US$ / 1K
Ghi bộ nhớ đệm
0,0019 US$ / 1K
Ghi bộ nhớ đệm, 5 phút
0,0019 US$ / 1K tokens

Ailoot tạm giữ một khoản ước tính trước yêu cầu. Sau khi có kết quả, phí cuối cùng được quyết toán theo mức sử dụng đo được. Việc quyết toán khi truyền luồng dùng bản ghi mức sử dụng cuối cùng. Cách hoạt động của cơ chế tạm giữ và quyết toán →

Ví dụ yêu cầu

Ailoot · OpenAI Chat

Ví dụ văn bảnĐầu vào, hình ảnhPython SDKNode.js SDKLuồng Python
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_TEXT_FILE:?Set your actual UTF-8 source-material file}"
export AILOOT_TEXT_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-k2.7-code-highspeed", "messages": []}')
f=Path(os.environ["AILOOT_TEXT_FILE"])
if not f.is_file():raise SystemExit("Choose your actual UTF-8 source material")
text=f.read_text(encoding="utf-8")
if not text.strip():raise SystemExit("Source material must contain text")
p["messages"]=[{"role":"user","content":"Summarize this material and quote supporting source passages.\n\n"+text}]
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
set -eu
: "${AILOOT_API_KEY:?Set your Ailoot API key}"
: "${AILOOT_IMAGE_FILE:?Set your actual PNG JPEG or WebP image}"
export AILOOT_IMAGE_FILE
python3 - <<'PY_REQUEST'
import json,os
from pathlib import Path
p=json.loads('{"model": "kimi-k2.7-code-highspeed", "messages": [{"role": "user", "content": [{"type": "text", "text": "Read labels and numbers in this image; flag unreadable text."}]}]}')
import base64
f=Path(os.environ["AILOOT_IMAGE_FILE"])
if not f.is_file():raise SystemExit("Choose an actual PNG JPEG or WebP image")
raw=f.read_bytes()
mime="image/png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "image/jpeg" if raw.startswith(b"\xff\xd8") else "image/webp" if raw[:4]==b"RIFF" and raw[8:12]==b"WEBP" else None
if not mime:raise SystemExit("Use PNG JPEG or WebP")
b64=base64.b64encode(raw).decode()
p["messages"][0]["content"].append({"type":"image_url","image_url":{"url":"data:"+mime+";base64,"+b64}})
Path("request.json").write_text(json.dumps(p,ensure_ascii=False))
PY_REQUEST
curl --fail-with-body --silent --show-error https://api.ailoot.ai/v1/chat/completions \
  -H "Authorization: Bearer $AILOOT_API_KEY" -H 'Content-Type: application/json' \
  --data-binary @request.json -D response-headers.txt -o result.json
python3 - <<'PY_RESULT'
import json
from pathlib import Path
print(json.dumps(json.loads(Path("result.json").read_text()),ensure_ascii=False,indent=2))
PY_RESULT
from openai import OpenAI
import os

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client = OpenAI(base_url="https://api.ailoot.ai/v1", api_key=os.environ["AILOOT_API_KEY"], max_retries=0)
resp = client.chat.completions.create(
    model="kimi-k2.7-code-highspeed",
    messages=[{"role": "user", "content": "Explain the difference between an observation and a hypothesis in three sentences."}],
)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

save_result(resp.to_dict(mode="json"))
import OpenAI from "openai";

if (!process.env.AILOOT_API_KEY?.trim()) throw new Error("Set AILOOT_API_KEY before making a request");
const client = new OpenAI({ baseURL: "https://api.ailoot.ai/v1", apiKey: process.env.AILOOT_API_KEY, maxRetries: 0 });
const resp = await client.chat.completions.create({
  model: "kimi-k2.7-code-highspeed",
  messages: [{ role: "user", content: "Explain the difference between an observation and a hypothesis in three sentences." }],
});
import { writeFileSync } from "node:fs";

function saveResult(data, stem = "result") {
  writeFileSync(stem + ".json", JSON.stringify(data, null, 2));
  console.log(JSON.stringify(data, null, 2));
  const saveBlob = (encoded, suffix, label) => {
    const raw = Buffer.from(encoded, "base64");
    const ext = raw.subarray(0,8).equals(Buffer.from([137,80,78,71,13,10,26,10])) ? "png" : raw[0]===255 && raw[1]===216 ? "jpg" : raw.subarray(0,4).toString()==="RIFF" && raw.subarray(8,12).toString()==="WEBP" ? "webp" : suffix;
    const file = `${stem}-${label}.${ext}`;
    writeFileSync(file, raw); console.log("Saved", file);
  };
  for (const [i, block] of (data.content || []).entries()) console.log("Content", i, JSON.stringify(block));
  for (const choice of data.choices || []) console.log("Choice", choice.index, JSON.stringify(choice.message || choice.delta || {}));
  for (const [i, item] of (data.output || []).entries()) {
    console.log("Output", i, JSON.stringify(item));
    if (item.type === "image_generation_call" && item.result) saveBlob(item.result, item.output_format || "bin", `output-${i}`);
  }
  for (const [ci, candidate] of (data.candidates || []).entries()) {
    for (const [pi, part] of (candidate.content?.parts || []).entries()) {
      console.log("Candidate/part", ci, pi, JSON.stringify(part));
      const blob = part.inlineData || part.inline_data;
      if (blob?.data) {
        const mime = blob.mimeType || blob.mime_type;
        const suffix = ({"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"})[mime] || "bin";
        saveBlob(blob.data, suffix, `candidate-${ci}-part-${pi}`);
      }
    }
  }
}

saveResult(resp);
from openai import OpenAI
import os
from pathlib import Path

if not os.environ.get("AILOOT_API_KEY", "").strip(): raise SystemExit("Set AILOOT_API_KEY before making a request")
client=OpenAI(base_url="https://api.ailoot.ai/v1",api_key=os.environ["AILOOT_API_KEY"],max_retries=0)
import base64, json
from pathlib import Path

def save_result(data, stem="result"):
    # Keep every field, including usage, IDs, reasoning and tool requests.
    Path(stem + ".json").write_text(json.dumps(data, ensure_ascii=False, indent=2), encoding="utf-8")
    print(json.dumps(data, ensure_ascii=False, indent=2))
    def save_blob(encoded, suffix, label):
        raw = base64.b64decode(encoded, altchars=b"-_", validate=True)
        ext = "png" if raw.startswith(b"\x89PNG\r\n\x1a\n") else "jpg" if raw.startswith(b"\xff\xd8") else "webp" if raw[:4] == b"RIFF" and raw[8:12] == b"WEBP" else suffix
        file = Path(stem + "-" + label + "." + ext)
        file.write_bytes(raw)
        print("Saved", file)
    for index, block in enumerate(data.get("content") or []):
        print("Content", index, json.dumps(block, ensure_ascii=False))
    for choice in data.get("choices") or []:
        print("Choice", choice.get("index"), json.dumps(choice.get("message", choice.get("delta", {})), ensure_ascii=False))
    for index, item in enumerate(data.get("output") or []):
        print("Output", index, json.dumps(item, ensure_ascii=False))
        if item.get("type") == "image_generation_call" and item.get("result"):
            save_blob(item["result"], item.get("output_format") or "bin", "output-" + str(index))
    for ci, candidate in enumerate(data.get("candidates") or []):
        for pi, part in enumerate((candidate.get("content") or {}).get("parts") or []):
            print("Candidate/part", ci, pi, json.dumps(part, ensure_ascii=False))
            blob = part.get("inlineData") or part.get("inline_data")
            if blob and blob.get("data"):
                mime = blob.get("mimeType") or blob.get("mime_type")
                suffix = {"image/png":"png", "image/jpeg":"jpg", "image/webp":"webp", "audio/wav":"wav", "audio/mpeg":"mp3", "video/mp4":"mp4"}.get(mime, "bin")
                save_blob(blob["data"], suffix, "candidate-" + str(ci) + "-part-" + str(pi))

with client.chat.completions.stream(model='kimi-k2.7-code-highspeed',messages=[{"role":"user","content":"Explain observations and hypotheses in three sentences."}]) as stream:
    with Path("stream-events.jsonl").open("w",encoding="utf-8") as log:
        for event in stream:
            payload=event.to_dict(mode="json")
            log.write(json.dumps(payload,ensure_ascii=False)+"\n"); log.flush()
            print(json.dumps(payload,ensure_ascii=False))
    final=stream.get_final_completion()
    save_result(final.to_dict(mode="json"),"stream-result")

Nhận và lưu kết quả

Ailoot · OpenAI Chat

json hoặc SSE

Lưu tất cả kết quả đã hoàn tất

Lưu mọi phản hồi hoàn chỉnh, tệp và phần nội dung được trả về.

Giữ mọi phương án trả lời cùng nội dung, lệnh gọi công cụ và dữ liệu suy luận của phương án đó. Với SSE, ghép các phần thay đổi theo chỉ số phương án và công cụ, giữ lý do kết thúc cuối cùng cùng dữ liệu sử dụng.

Nếu cần kiểm tra phản hồi gốc

Giữ ID và header của yêu cầu, phản hồi. Không cung cấp URL chung để truy xuất tác vụ văn bản.

Trường phản hồi
TrườngLoại
Trườngchoices[].indexLoạiinteger
Trườngchoices[].message.contentLoạistring|null
Trườngchoices[].message.tool_callsLoạitool_call[]
Trườngchoices[].message.reasoning_contentLoạistring
Trườngchoices[].message.reasoning_detailsLoạiobject|array
Trườngchoices[].finish_reasonLoạistring|null
TrườngusageLoạiobject
Lỗi và bước tiếp theo
Phản hồiĐiều kiệnBước tiếp theo
Phản hồi400 · invalid_request_errorĐiều kiệnTrường bắt buộc, cách biểu diễn tài liệu hoặc giá trị tham số không hợp lệBước tiếp theoSửa các trường được chỉ ra trước khi gửi yêu cầu tạo mới.

Bí danh

Bí danh mô hình

Ailoot kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

Bí danh đường dẫn phương thức

Dùng các đường dẫn phương thức hiển thị ở trên.

ID gọi liên quan

kimi-for-coding-highspeed, kimi-highspeed, kimi-highspeed-latest, kimi-k2.7-code-highspeed

FAQ · MoonshotAI: Kimi K2.7 Code Highspeed
Có những đầu vào và kết quả nào?

POST /v1/messages · kimi-for-coding-highspeed: text, image → text

POST /v1/responses · kimi-for-coding-highspeed: text, image → text

POST /v1/chat/completions · kimi-for-coding-highspeed: text, image → text

POST /v1/messages · kimi-highspeed: text, image → text

POST /v1/responses · kimi-highspeed: text, image → text

POST /v1/chat/completions · kimi-highspeed: text, image → text

POST /v1/messages · kimi-highspeed-latest: text, image → text

POST /v1/responses · kimi-highspeed-latest: text, image → text

POST /v1/chat/completions · kimi-highspeed-latest: text, image → text

POST /v1/messages · kimi-k2.7-code-highspeed: text, image → text

POST /v1/responses · kimi-k2.7-code-highspeed: text, image → text

POST /v1/chat/completions · kimi-k2.7-code-highspeed: text, image → text

Yêu cầu sử dụng những trường nào?

POST /v1/messages · kimi-for-coding-highspeed: model, messages, system, max_tokens, stream, metadata

POST /v1/responses · kimi-for-coding-highspeed: model, input, instructions, stream

POST /v1/chat/completions · kimi-for-coding-highspeed: model, messages, stream

POST /v1/messages · kimi-highspeed: model, messages, system, max_tokens, stream, metadata

POST /v1/responses · kimi-highspeed: model, input, instructions, stream

POST /v1/chat/completions · kimi-highspeed: model, messages, stream

POST /v1/messages · kimi-highspeed-latest: model, messages, system, max_tokens, stream, metadata

POST /v1/responses · kimi-highspeed-latest: model, input, instructions, stream

POST /v1/chat/completions · kimi-highspeed-latest: model, messages, stream

POST /v1/messages · kimi-k2.7-code-highspeed: model, messages, system, max_tokens, stream, metadata

POST /v1/responses · kimi-k2.7-code-highspeed: model, input, instructions, stream

POST /v1/chat/completions · kimi-k2.7-code-highspeed: model, messages, stream

Áp dụng những giới hạn nào?

POST /v1/messages · kimi-for-coding-highspeed: ctx: 262144; max_out: 65536; messages.min_items: 1; max_tokens.minimum: 1

POST /v1/responses · kimi-for-coding-highspeed: ctx: 262144; max_out: 65536

POST /v1/chat/completions · kimi-for-coding-highspeed: ctx: 262144; max_out: 65536; messages.min_items: 1

POST /v1/messages · kimi-highspeed: ctx: 262144; max_out: 65536; messages.min_items: 1; max_tokens.minimum: 1

POST /v1/responses · kimi-highspeed: ctx: 262144; max_out: 65536

POST /v1/chat/completions · kimi-highspeed: ctx: 262144; max_out: 65536; messages.min_items: 1

POST /v1/messages · kimi-highspeed-latest: ctx: 262144; max_out: 65536; messages.min_items: 1; max_tokens.minimum: 1

POST /v1/responses · kimi-highspeed-latest: ctx: 262144; max_out: 65536

POST /v1/chat/completions · kimi-highspeed-latest: ctx: 262144; max_out: 65536; messages.min_items: 1

POST /v1/messages · kimi-k2.7-code-highspeed: ctx: 262144; max_out: 65536; messages.min_items: 1; max_tokens.minimum: 1

POST /v1/responses · kimi-k2.7-code-highspeed: ctx: 262144; max_out: 65536

POST /v1/chat/completions · kimi-k2.7-code-highspeed: ctx: 262144; max_out: 65536; messages.min_items: 1

Xem thêm chi tiết

Kết nối Ailoot với Claude Code, OpenCode, Hermes hoặc ứng dụng của bạn.

Công ty và danh mục dự án của công ty

Công ty và danh mục dự án của công ty: hàng triệu khách hàng; doanh số hàng tỷ mỗi tháng.

Mua token với giá ưu đãi.

Ưu đãi thuê bao cho nhu cầu thường xuyên. Mã khuyến mãi giảm đến 50% khi mua token.

Thuê bao
Chọn gói ưu đãi cho các yêu cầu thường xuyên của bạn.
Mã giảm đến 50%
Nhập mã khi mua. Giá được tính lại theo chương trình đang áp dụng.
Chi phí trong lịch sử
Mô hình, token và số tiền được lưu cho mỗi yêu cầu.

Chọn gói thuê bao · Xem giá mô hình

Kết nối API vào sản phẩm bạn đang bán.

SaaS, ứng dụng và bot — theo đề nghị giao kết chính thức và thỏa thuận cấp phép Ailoot. Muốn bán lại, hãy yêu cầu giấy phép bán lại.

Ứng dụng thương mại
Tích hợp tạo văn bản, ảnh, video và âm thanh vào các tính năng trả phí của dịch vụ.
Giấy phép bán lại
Gửi mô tả dự án và cách cung cấp quyền truy cập. Yêu cầu điều khoản sử dụng và bán lại bằng văn bản.
Tài liệu trên website
Đề nghị giao kết, thỏa thuận cấp phép và chính sách xử lý dữ liệu có sẵn trước khi kết nối.

Yêu cầu giấy phép bán lại · Đề nghị giao kết và thỏa thuận cấp phép